| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Strut Plate Bolts http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=12094 |
Page 1 of 1 |
| Author: | BJ'naKJ [ Tue Sep 05, 2006 4:53 pm ] |
| Post subject: | Strut Plate Bolts |
I just finished installing a Rockfather II lift using a 3/8" strut spacer on top of the strut/coil assembly. I was hoping for a level stance, however I still have the stock rake, lower in the front. I was told I could go with an additional strut spacer for a little more lift in the front but that the stock bolts are too short. Has anyone replaced these bolts with something longer? They appear to be pressed into the plate in some way. Can they be pounded out? Where can I get replacements that are up to spec and 1/2" or so longer? Does anyone make a replacement for the entire plate with bolts only longer? |
|
| Author: | 05kjrenny [ Tue Sep 05, 2006 5:03 pm ] |
| Post subject: | |
they can be pounded out and put some longer ones in there |
|
| Author: | kolesy [ Tue Sep 05, 2006 5:49 pm ] |
| Post subject: | |
Did you do a clevis lift as well? If not you can gain some more there. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|