LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Quick question.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=12105		 Page 1 of 1
Author:  Jeepjeepster [ Tue Sep 05, 2006 8:31 pm ]
Post subject:  Quick question.
Im going to a local meet and great this weekend and an rti ramp will be there. I thought there may be one but forgot my tools at home. I have some basic sockets in the jeep but I dont have a 1/2 drive ratchet. Anyway, I need to know what size the sway bar end links are. Im not going to take the entire sway bar off, just the end links. I need to know the top and bottom sizes and if I need a wrench to put on the bolt while I take the nut off. My jeep is along way away since parking sucks here. I do not believe a wrench is needed on the bottom, but I think the top needs one. Thanks a bunch guys!! I also heard a TK will be there!! :D
Author:  Mutt [ Tue Sep 05, 2006 8:36 pm ]
Post subject: 
15mm and 18mm if I remember correctly. I'd zip tie the swaybar up and out of the way, similar to what JKS does with their disconnects.
Author:  Jeepjeepster [ Tue Sep 05, 2006 9:05 pm ]
Post subject: 
Mutt wrote:
15mm and 18mm if I remember correctly. I'd zip tie the swaybar up and out of the way, similar to what JKS does with their disconnects.


I forgot zipties also. Ill just be driving around in a parking lot, I think the bushings will keep it up if I do not hit any bumps. I think I have a 15mm in there, not to sure about an 18mm. I guess a trip to lowes fridays evening is in store. Thanks mutt!!

Ill be sure to post TONS of pics. Ill end up taking around 200 or so. I love pictures. :)
Author:  Mutt [ Tue Sep 05, 2006 9:07 pm ]
Post subject: 
Just do me a favor and score over 500 on that 20 deg RTI!
Author:  Jeepjeepster [ Tue Sep 05, 2006 9:21 pm ]
Post subject: 
Mutt wrote:
Just do me a favor and score over 500 on that 20 deg RTI!


Yea ok. Im sure Ill get a 500. :roll: I would like to have the rancho rear shocks. I do not get much flex with the short ome shocks, and I just put the daystart extended rear bumpstops in, so that takes away 1.25in of flex. :?
Author:  Waldn [ Tue Sep 05, 2006 10:04 pm ]
Post subject: 
Mutt wrote:
15mm and 18mm if I remember correctly. I'd zip tie the swaybar up and out of the way, similar to what JKS does with their disconnects.


yep had mine off this weekend
nuts are 18 mm, top bolt head 15 mm, not needed for bottom bolts
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/