LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Oil Pressure Gauge
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=13069		 Page 1 of 1
Author:  crash87 [ Tue Oct 03, 2006 12:01 am ]
Post subject:  Oil Pressure Gauge
Could anyone tell me how to install an oil pressure gauge, and what the proper pressure rang is on the 3.7?
Author:  saxdogg [ Tue Oct 03, 2006 5:53 pm ]
Post subject: 
(1) Remove oil pressure sending unit (Fig. 79)and
install gauge assembly C-3292.
(2) Run engine until thermostat opens.
(3) Oil Pressure:
² Curb Idle–25 kPa (4 psi) minimum
² 3000 rpm–170 - 758 kPa (25 - 110 psi)
(4) If oil pressure is 0 at idle, shut off engine.
Check for a clogged oil pick-up screen or a pressure
relief valve stuck open.

Can't post pic here or i'd show you the page from the SM....email me if you still want it.

JP
Author:  crash87 [ Tue Oct 03, 2006 10:38 pm ]
Post subject: 
PM sent, thanks for the reply.
Author:  saxdogg [ Wed Oct 04, 2006 4:51 pm ]
Post subject: 
crash87 wrote:
PM sent, thanks for the reply.



Nothing showed up in my PM box?!?!?!! :?:
Try it again....

jp
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/