The battery in my 02 croaked so went to replace it and noticed the battery tray has a crack in it right about where the retaining bolt is resulting in a loose fit of the battery Is there a way to fit it or strap the battery down better?The tray itself isn't the best quality, rather flimsy.

thanks

David

Short of fabricating a new one, I would try to cut a couple slots somewhere on it to slip a small ratchet strap thru and keep it held down.

_________________
2008 Unlimited Rubicon - 3.5" AEV/Nth lift - 35" MT/R with Kevlar - AEV Wheels - York OBA
2008 Patriot - Fuel Saver

pixeldzn,

That sounds like a plan and much better securing method that the original. As this happened on the road I used duct tape to keep it from moving around till I got home.
Was really surprised how flimsy that thing is ,the one on my '95 Cherokee is considerably more robust.

Thanks for the tip

David

Some decent stuff here.Stainless too.

http://store.summitracing.com/egnsearch.asp?Ntk=KeywordSearch&DDS=1&Ntt=battery+tray&x=0&y=0&N=+115&searchinresults=false

_________________
'02 KJ sport
3.7 V6
45RFE/NP231J
Frankenlifted
Powertrax no-slip
Cook Bros. Diff guard
Skids front to back
RRO rock rails
10LB PowerTank
245/75-16 MT/R