The other day I hit the switch to roll my window down at the bank and the window goes down all the way normal. But when it hit the bottom the motor/track started making a loud clicking. I quick hit the switch up and it stopped. I then tried to roll it up and it came back up withuot any problem or noise. Now when I try to roll it down it does not move and a cable starts to push out of the window seal on the inside of the door and the window won't move. Now it wont go down and every time I try the cable comes out to say hello. I already have an appointment set under warranty but if it's an easy fix I would rather save the $100 for the deductable. Anyone have this problem?

The KJ is back from the dealer!! Of course they called my home number even though I gave the manger my WORK number. naturally the part was not in stock, so I had to return to the dealer, and wait ten minutes for them to deliver my broke kj. At least I know they looked at my window. How do I know this you wonder??? The Three full size hand prints on the window gave me a clue In their defense, it would have taken thirty seconds to clean the window.

Finally pulled the door panel off and found that the tube that the actuator cable is supposed to ride it cracked. So when I would try to roll the window down the crack seperated and instead of the window going down the sheathe seperates and the cable goes up and out past the weather strip and says hello. It goes in on monday to get fixed. I was trying to save the $100 but I don't think I can find a reegulator assembly for that price.