| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| UBJ dust boots http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=15178 |
Page 1 of 1 |
| Author: | jason thompson [ Sun Dec 03, 2006 5:42 pm ] |
| Post subject: | UBJ dust boots |
Has any one looked in to replacing just the boot? I guess I am thinking I want to do like I did with the TJ and replace all the dust boots that I can befor I have a problem I know that I can get poly boots for the TJ wich are easy to install and will hold up to syn. grease do they make them for the KJ |
|
| Author: | Jeepin Al [ Sun Dec 03, 2006 8:33 pm ] |
| Post subject: | |
Get box of boots, they are a set, upper and lowers Part number 513102 G (black) or place an R and get red, from Energy Suspension They should do the trick. Just slip thme over the existing boot. Al |
|
| Author: | jason thompson [ Sun Dec 03, 2006 9:21 pm ] |
| Post subject: | |
Jeepin Al wrote: Get box of boots, they are a set, upper and lowers
Part number 513102 G (black) or place an R and get red, from Energy Suspension They should do the trick. Just slip thme over the existing boot. Al Thanks PN's make life easy I did not see them listed any where yet but I have not looked all that hard |
|
| Author: | Jeepin Al [ Sun Dec 03, 2006 9:46 pm ] |
| Post subject: | |
They are listed for the 70-80 Chrysler large car ball joints, as are the K772 I use in my arms. Al |
|
| Author: | jg45 [ Mon Dec 04, 2006 1:18 pm ] |
| Post subject: | |
Al, Will these fix the gap between the boot and the joint bung on your arms? I have been looking to find a boot that will not fold over leaving a gap. Thanks, |
|
| Author: | Jeepin Al [ Mon Dec 04, 2006 2:07 pm ] |
| Post subject: | |
They should, I have been using them on the last 10 sets, seem to work well. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|