LOST JEEPS :: View topic - Reverse Lighting

Well, i'm about fed up with not being able to see a darn thing while backing up. I dealt with it for a while, but things gotta change.

I dont have a roof rack, and i dont want to mount lights to the bottom of the bumper.

I was thinking about using angle iron and fabbing a mount that would attach to the spare holder.

Has anyone else done anything like this that i've just missed on my ventures through the site, or am i a pioneer in my own sad little way?

Any other ideas would be fine, i'd love to be a guinea pig right now as i've tried nothing and i'm all out of ideas.

I remember seeing someone with lights that mounted to the trailer hitch. I have been trying to locate them myself but cant find them. That might be a good idea if you have a reciever. Apprarently you can still use it with the lights.

i got a set at advance auto for my ford but pepboys carries them as well. they splice into the reverse light wire.

O_Dogg wrote:

i got a set at advance auto for my ford but pepboys carries them as well. they splice into the reverse light wire.

I used a set of lights just like these and mounbted them to the hinge covers of the rear glass. I put 1/16th thick sheet metal behind the plastic hinge covers for strength, added washers to spread the force and mounted the lights throught the covers. I then ran the wires in through center break light. I too used a tap from the stock backup light's to flip the relay for them. What this did was turn on the lights when I put the Jeep in reverse. I soon wished I could turn them on without having to put it is reverse and ended up wiring a panel switch so I could turn them on whenever I wanted. Mine are mounted high enough that they make decent work lights.

John
];')

Author:	JMLoughrey [ Mon Dec 11, 2006 12:52 am ]
Post subject:	Reverse Lighting
Well, i'm about fed up with not being able to see a darn thing while backing up. I dealt with it for a while, but things gotta change. I dont have a roof rack, and i dont want to mount lights to the bottom of the bumper. I was thinking about using angle iron and fabbing a mount that would attach to the spare holder. Has anyone else done anything like this that i've just missed on my ventures through the site, or am i a pioneer in my own sad little way? Any other ideas would be fine, i'd love to be a guinea pig right now as i've tried nothing and i'm all out of ideas.

Author:	mlr [ Mon Dec 11, 2006 1:53 am ]
Post subject:
Just a thought, but: You might be able to just get some angle iron and mount it behind the spare like i'm doing with my cb antenna mount, but extend the side so its past the spare tire and mount a light facing to the rear on it. Sort of like this:

Author:	jason thompson [ Mon Dec 11, 2006 2:11 am ]
Post subject:	Re: Reverse Lighting
JMLoughrey wrote: Well, i'm about fed up with not being able to see a darn thing while backing up. I dealt with it for a while, but things gotta change. I dont have a roof rack, and i dont want to mount lights to the bottom of the bumper. I was thinking about using angle iron and fabbing a mount that would attach to the spare holder. Has anyone else done anything like this that i've just missed on my ventures through the site, or am i a pioneer in my own sad little way? Any other ideas would be fine, i'd love to be a guinea pig right now as i've tried nothing and i'm all out of ideas. I saw a guy that had a light that was mounted with a wing nut through the center cap of the spare tire he had some of those male/female quick connectors so that if he got a flat he could just pull it off and put it back when he was done I did not see it in use but it made it through a trail ride just fine and I would guess it would be rather bright cause he used a hela 550 light he did a relay with a master swich so he could turn it off or it would come on when he put it in reverse

Author:	corwyyn [ Mon Dec 11, 2006 2:26 am ]
Post subject:
Phxtoad has an IPF kit on the back of his; here's a link to his CarDomain page with pictures and more info.

Author:	Jeepjeepster [ Mon Dec 11, 2006 8:47 am ]
Post subject:
Im thinking about mounting some on my gas tank skid. I would have to mount them high enough that they wouldnt get hit offroad. So they couldnt really shine a good distance.

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Reverse Lighting http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=15469	Page 1 of 2

Author:	Jeger [ Mon Dec 11, 2006 8:59 am ]
Post subject:
Someone said they put some LED's in for their backup lights, and they were better than stock backups. Not nearly as bright as any thing else mentioned, but I was thinking of doing this just as a simple mod.

Author:	JMLoughrey [ Mon Dec 11, 2006 10:23 am ]
Post subject:
IPF light kit isnt a bad idea, gonna look into that a bit more. Depending on price, i may just do the mount to the spare tire idea, i have angle iron as it is, and it'd just be a matter of drilling a few holes. The LEDs in my back up lights sound like a darn good idea, anyone have any info on this as to where to begin? I did a quick search but my results were...well bad.

Author:	2372ighost [ Mon Dec 11, 2006 10:23 am ]
Post subject:
Here's one option http://www.whitenight.com/index.htm And here http://www.jcwhitney.com/autoparts/Prod ... +up+lights

Author:	Sport [ Mon Dec 11, 2006 10:35 am ]
Post subject:
I remember seeing someone with lights that mounted to the trailer hitch. I have been trying to locate them myself but cant find them. That might be a good idea if you have a reciever. Apprarently you can still use it with the lights.

Author:	Guyute1210 [ Mon Dec 11, 2006 5:54 pm ]
Post subject:
You can try these...I saw them on 2 guys garage the other day. They look cool and like they would work well. http://www.spiderlite.com/

Author:	O_Dogg [ Wed Dec 13, 2006 3:34 pm ]
Post subject:
Sport wrote: I remember seeing someone with lights that mounted to the trailer hitch. I have been trying to locate them myself but cant find them. That might be a good idea if you have a reciever. Apprarently you can still use it with the lights. i got a set at advance auto for my ford but pepboys carries them as well. they splice into the reverse light wire.

Author:	iliveinacage [ Thu Dec 14, 2006 12:18 pm ]
Post subject:	backup lights
This is what i did. These are $25 lights i got at pepboys. Mounted them on the bottom of the bumper as shown. I relayed them off the stock backup lights with power coming from a distribution block i installed under my rear seat for all my toys.

Author:	80351 [ Sat Dec 16, 2006 12:50 am ]
Post subject:
Sport wrote: I remember seeing someone with lights that mounted to the trailer hitch. I have been trying to locate them myself but cant find them. That might be a good idea if you have a reciever. Apprarently you can still use it with the lights. As I work at an RV store we have the lights that mount to the hitch, if your interested I'll find out who makes them. For that matter I have them on mine and am getting ready to take them off in favor of a newer design by Draw Tite. Don't know whether the lightswork anymore but they are easy to get. You can have them if you like. Dave

Author:	Kugellager [ Sat Dec 16, 2006 10:28 am ]
Post subject:
O_Dogg wrote: i got a set at advance auto for my ford but pepboys carries them as well. they splice into the reverse light wire. I used a set of lights just like these and mounbted them to the hinge covers of the rear glass. I put 1/16th thick sheet metal behind the plastic hinge covers for strength, added washers to spread the force and mounted the lights throught the covers. I then ran the wires in through center break light. I too used a tap from the stock backup light's to flip the relay for them. What this did was turn on the lights when I put the Jeep in reverse. I soon wished I could turn them on without having to put it is reverse and ended up wiring a panel switch so I could turn them on whenever I wanted. Mine are mounted high enough that they make decent work lights. John ];')

Author:	riptricket [ Sun Apr 01, 2007 12:42 am ]
Post subject:
brigrat, did that plug-in light, the light buster, not work at all? or was it just not very bright?

Author:	EOD-KJ [ Sun Apr 01, 2007 11:58 am ]
Post subject:
just a little 'by the way'...about halfway down the page : http://rocky-road.com/kjmisc.html

Author:	hyedipin [ Sun Nov 08, 2009 10:50 pm ]
Post subject:

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	Brigrat [ Sat Dec 16, 2006 11:04 am ]
Post subject:
I Use this http://www.northerntool.com/webapp/wcs/ ... roductinfo It isn't the best solution, but it is an improvement...

Author:	JMLoughrey [ Sat Dec 16, 2006 10:42 pm ]
Post subject:
i'm really liking the idea of mounting it to the rear panel on the window glass. Cheap part to replace when the lease is up. depending if i get a hitch or not for xmas will play a large roll on what i actually do.

Author:	hyedipin [ Sun Nov 08, 2009 4:53 pm ]
Post subject:
Kugellager wrote: O_Dogg wrote: i got a set at advance auto for my ford but pepboys carries them as well. they splice into the reverse light wire. I used a set of lights just like these and mounbted them to the hinge covers of the rear glass. I put 1/16th thick sheet metal behind the plastic hinge covers for strength, added washers to spread the force and mounted the lights throught the covers. I then ran the wires in through center break light. I too used a tap from the stock backup light's to flip the relay for them. What this did was turn on the lights when I put the Jeep in reverse. I soon wished I could turn them on without having to put it is reverse and ended up wiring a panel switch so I could turn them on whenever I wanted. Mine are mounted high enough that they make decent work lights. John ];') I know this is an old topic, but do you have pictures of this setup? I want to get some lights without making my jeep look like a carnival ride, something subtle. That's why I was thinking of hooking up lights underneath the bumper, but that won't illuminate distance well.