| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Lots of code errors, HELP!!!!! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=15557 |
Page 1 of 1 |
| Author: | Jeep4me99 [ Wed Dec 13, 2006 11:09 am ] |
| Post subject: | Lots of code errors, HELP!!!!! |
On the way home from radio shack this afternoon I came around a turn, hit the accelerator and the lib starting shaking quite a bit. I though maybe it was the driveshaft. When i got home I could hear the misfires, so i checked the codes. I got 300-304 cylinder misfires 351-354 i believe: ignition coils, Peak primary circuit current not achieved with maximum dwell time. I had the KJ in some pretty deep water this weekend, but she ran fine sunday and monday. Any ideas??? (oh and its out of warranty ) |
|
| Author: | MoladoGuy [ Wed Dec 13, 2006 2:30 pm ] |
| Post subject: | Re: Lots of code errors, HELP!!!!! |
Jeep4me99 wrote: 300-304 cylinder misfires # P0300 Engine Misfire Detected # P0301 Cylinder 1 Misfire Detected # P0302 Cylinder 2 Misfire Detected # P0303 Cylinder 3 Misfire Detected # P0304 Cylinder 4 Misfire Detected Jeep4me99 wrote: 351-354 i believe: ignition coils, Peak primary circuit current not achieved with maximum dwell time. # P0351 Ignition Coil 1 Control Circuit # P0352 Ignition Coil 2 Control Circuit # P0353 Ignition Coil 3 Control Circuit # P0354 Ignition Coil 4 Control Circuit Found here: http://www.allpar.com/fix/computer-codes.html DOH. Not sure if that will help but it really gives an idea of the exact problem. Misfires and Ignition Coil problems = too much water? |
|
| Author: | Jeep4me99 [ Wed Dec 13, 2006 2:55 pm ] |
| Post subject: | |
yeah I'm pretty sure too much water was the problem, but i also think I'm getting faulty codes, or the problem is something else. now i get codes 301-305, cylinders 1-5 misfiring, there is no way. It still starts and runs pretty strong, just vibrates a bunch, it seems more like 1 cylinder is actually misfiring, I'm starting to wonder if there is an electrical connection somewhere that i need to "mess" with |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|