Need a Flowmaster Guru

chetos · **Posted:** Tue Dec 26, 2006 7:01 pm

OK so I have decided to get a Flowmaster series 50 SUV and start building my computer. I am going to start saving for an ARB...that's still about a year out though :evil:

.

Anyway, On every sight I go to to buy a Flowmaster, all of them say that none fit our libby. I know I want the 52557. This will fit right?? Just making sure so I am not laughed at my local muffler shop. Once again, thanks guys/gals for all your insight and help...

RAYMAN975 · **Posted:** Tue Dec 26, 2006 7:11 pm

you just gotta get the right size piping inlet AND outlet, and make sure its a single in, single out. and the right offset too in and out

im pretty sure our exhausts are 2- 1/4" inlet and outlet, and centered inlet and offset outlet or vise versa, but not positive on that, someone else check in

im going to go with the 50 series as well, with the stock exhaust. the 40 series is a shorter muffler, and should be louder. but the 50 series should fit in there better since the stock muffler is long as well as the 50 series. either way they will probably have to add a few inches of pipe to make it fit.

USPLibby · **Joined:** Thu Jul 28, 2005 12:29 am **Posts:** 377

The correct Flowmaster mufflers for the Liberty are 2.5" center in and offset out. It's not really a self install unless you know how to weld as the Flowmaster is quite a bit shorter than the stock muffler and needs an extra piece of pipe welded on to make up the difference.

I got the Delta Flow model # 842552, but they don't make these anymore.

Also, I see on at least one websites, All J's, they sell some ARB bumpers that are dented or scratched for less. Look into it as I had to paint my ARB anyways to match the color of my Liberty.

Need a Flowmaster Guru

Who is online