LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Help with my Christmas present...I know what u'll all say...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=15856		 Page 1 of 2
Author:  chetos [ Sat Dec 23, 2006 11:52 am ]
Post subject:  Help with my Christmas present...I know what u'll all say...
So...my wife and I pick our 'big' present every year. She's either getting a dining room set or living room set the day after christmas---she wants to wait for the big sales. Here's my choices:

1. God computer...I would build this myself. I already have motherboard, HD, cd and dvd drives and other misc stuff. This would be cool new alien looking case, Intel core 2 duo chip, 2 gb ram (already have 2 gb's ready), 1 gb video card (pci express) etc....God computer for me anyway.

2. BFG AT/S.

3. Bull bar, magnaflow exhaust.

I was all set to order my computer parts off of Tiger Direct until I saw Skyjump136's video of him playing in the snow. I had forgotten about my Libby until then. Now I don't know!!
Author:  JJsTJ [ Sat Dec 23, 2006 12:16 pm ]
Post subject: 
Personally I wouldn't waste my money on #3. the stock exhaust w/ a flowmaster works great and is cheap. I don't see any benefit to a Bull bar unless it is attached to a steel bumper.

Sounds like it wouldn't take much to get the computer finished and then still have some $ left over toward a set of other than BFG AT's.
Author:  uvalax236 [ Sat Dec 23, 2006 12:31 pm ]
Post subject: 
Go for the computer parts and save the rest of the money for a lift.
Author:  Jeger [ Sat Dec 23, 2006 12:33 pm ]
Post subject: 
If you build the puter it will be outdated next year....fact of life.... Skip the BFG's Get yourself some General Grabber AT2's and use the money you saved on the BFG's for a rev-tek lift.
Author:  psinsyd [ Sat Dec 23, 2006 12:49 pm ]
Post subject: 
Jeger wrote:
If you build the puter it will be outdated next year....fact of life.... Skip the BFG's Get yourself some General Grabber AT2's and use the money you saved on the BFG's for a rev-tek lift.


There ya go. I love the AT2's.

Didn't see a lift in your sig, so maybe you could squeeze a bit more cash into the present and get the Rusty's coil lift and Grabbers. You'd be set!

'Puters are cool too. You can totally get caught up if you want top of the line stuff. I've got a 3gig P4, 2G RAM, Radeon x1800st vid card, sata HDs in RAID 0, yada yada yada.

Anyways, back to Jeeps. Get the Grabbers.........and the Rusty's kit!!

I'm probably not that good of an influence, I know....

8)
Author:  chetos [ Sat Dec 23, 2006 1:28 pm ]
Post subject: 
Jeger wrote:
If you build the puter it will be outdated next year....fact of life.... Skip the BFG's Get yourself some General Grabber AT2's and use the money you saved on the BFG's for a rev-tek lift.


What't the road noise like with AT2's???
Author:  Jeepjeepster [ Sat Dec 23, 2006 1:43 pm ]
Post subject: 
chetos wrote:
Jeger wrote:
If you build the puter it will be outdated next year....fact of life.... Skip the BFG's Get yourself some General Grabber AT2's and use the money you saved on the BFG's for a rev-tek lift.


What't the road noise like with AT2's???


Mine were alittle loud.. They would roar around 25-45mph.. Mine were the 255/70's so they were alittle wider.. The 245's may not be as loud.

A bull bar is a nice touch to a jeep. Which one did you want?

I wouldnt worry with the exhaust..
Author:  chetos [ Sat Dec 23, 2006 2:10 pm ]
Post subject: 
Jeepjeepster wrote:
chetos wrote:
Jeger wrote:
If you build the puter it will be outdated next year....fact of life.... Skip the BFG's Get yourself some General Grabber AT2's and use the money you saved on the BFG's for a rev-tek lift.


What't the road noise like with AT2's???


Mine were alittle loud.. They would roar around 25-45mph.. Mine were the 255/70's so they were alittle wider.. The 245's may not be as loud.

A bull bar is a nice touch to a jeep. Which one did you want?

I wouldnt worry with the exhaust..


I don't know yet. I am not sure if the Mopar one will fit...it lists for 03-04. The only other one I've seen is JC Whitney.
Author:  psinsyd [ Sat Dec 23, 2006 3:01 pm ]
Post subject: 
I had minimal (and I mean minimal) road noise between 30mph and 40mph. Nothing intolerable, and you pretty much had to make it a point to notice it. Can't wait to get them thrown on the steelies and back on the KJ!

8)
Author:  iceman7311 [ Sat Dec 23, 2006 4:18 pm ]
Post subject: 
when you say 1 Gb video card i am assuming you mean 7950 gx2? i would say get a 8800 gts.

and when you say bull bar do you mean arb of the mopar one?
Author:  Jeepjeepster [ Sat Dec 23, 2006 4:22 pm ]
Post subject: 
iceman7311 wrote:
when you say 1 Gb video card i am assuming you mean 7950 gx2? i would say get a 8800 gts.

and when you say bull bar do you mean arb of the mopar one?


I think he means the mopar one of something like it. :wink:
Author:  iceman7311 [ Sat Dec 23, 2006 4:25 pm ]
Post subject: 
then i would say save up and get arb :D
Author:  LiLredLibby [ Sat Dec 23, 2006 4:54 pm ]
Post subject: 
I am agreeing with the AT2 Generals,but I think they got the size wrong.Ive got 265/70/16 on my Libby and I have plenty of room.That way,at 90.00 a piece you will still have money left over for a Rustys spacer lift.My lift netted me 3.25 inches and if you install it right you wont have any of the problems that some on here say you will.Just my 2pennies.
Author:  KJ04 [ Sat Dec 23, 2006 7:18 pm ]
Post subject: 
LiLredLibby wrote:
I am agreeing with the AT2 Generals,but I think they got the size wrong.Ive got 265/70/16 on my Libby and I have plenty of room.That way,at 90.00 a piece you will still have money left over for a Rustys spacer lift.My lift netted me 3.25 inches and if you install it right you wont have any of the problems that some on here say you will.Just my 2pennies.


Just currious, how would you install a OTT spacer wrong?
Author:  JJsTJ [ Sat Dec 23, 2006 7:23 pm ]
Post subject:  Re: Help with my Christmas present...I know what u'll all sa
chetos wrote:
So...my wife and I pick our 'big' present every year. She's either getting a dining room set or living room set the day after christmas---she wants to wait for the big sales. Here's my choices:

1. God computer...I would build this myself. I already have motherboard, HD, cd and dvd drives and other misc stuff. This would be cool new alien looking case, Intel core 2 duo chip, 2 gb ram (already have 2 gb's ready), 1 gb video card (pci express) etc....God computer for me anyway.

2. BFG AT/S.

3. Bull bar, magnaflow exhaust.

I was all set to order my computer parts off of Tiger Direct until I saw Skyjump136's video of him playing in the snow. I had forgotten about my Libby until then. Now I don't know!!


Not any mention of a lift on his list. :?
Author:  chetos [ Sat Dec 23, 2006 7:34 pm ]
Post subject:  Re: Help with my Christmas present...I know what u'll all sa
JJsKJ wrote:
chetos wrote:
So...my wife and I pick our 'big' present every year. She's either getting a dining room set or living room set the day after christmas---she wants to wait for the big sales. Here's my choices:

1. God computer...I would build this myself. I already have motherboard, HD, cd and dvd drives and other misc stuff. This would be cool new alien looking case, Intel core 2 duo chip, 2 gb ram (already have 2 gb's ready), 1 gb video card (pci express) etc....God computer for me anyway.

2. BFG AT/S.

3. Bull bar, magnaflow exhaust.

I was all set to order my computer parts off of Tiger Direct until I saw Skyjump136's video of him playing in the snow. I had forgotten about my Libby until then. Now I don't know!!


Not any mention of a lift on his list. :?


This is our main vehicle right now and I have to wait until 'someone else' gets a new car before I can do that.
Author:  JJsTJ [ Sat Dec 23, 2006 7:53 pm ]
Post subject:  Re: Help with my Christmas present...I know what u'll all sa
chetos wrote:
JJsKJ wrote:
chetos wrote:
So...my wife and I pick our 'big' present every year. She's either getting a dining room set or living room set the day after christmas---she wants to wait for the big sales. Here's my choices:

1. God computer...I would build this myself. I already have motherboard, HD, cd and dvd drives and other misc stuff. This would be cool new alien looking case, Intel core 2 duo chip, 2 gb ram (already have 2 gb's ready), 1 gb video card (pci express) etc....God computer for me anyway.

2. BFG AT/S.

3. Bull bar, magnaflow exhaust.

I was all set to order my computer parts off of Tiger Direct until I saw Skyjump136's video of him playing in the snow. I had forgotten about my Libby until then. Now I don't know!!


Not any mention of a lift on his list. :?


This is our main vehicle right now and I have to wait until 'someone else' gets a new car before I can do that.


Yep, my coment was toward everyone else mentioning lifts.
So whatcha think? Figure out what you are gonna do? :wink:
Author:  LiLredLibby [ Sat Dec 23, 2006 8:42 pm ]
Post subject: 
KJ04/JJsKJ....Long story short..For about 6 months thats all i read about on these forums was to stay away from ott lifts.
Just about EVERYONE said struts will blow ,ubjs will hit springs,cv's will be at ridiculous angles etc.EVERYONE thought that if you didnt spend a millon dollars on your lift that it would come back to haunt you.Well guys i've been a auto tech for about 24 years and i say no matter how you lift ifs the change in geometry is gonna be in jepordy,but no more than wheelin it's self.With that said I was just wondering why EVERYONE says to stay away from them?Maybe they arent doing something right.And to respond to JJsKJ reply......You know that the mod bug will get you,and if your goin have to get new tires theres no since in buying 2 sets.So much for ...Long story short..Ha..Ha.
Author:  Jeger [ Sun Dec 24, 2006 1:57 am ]
Post subject:  Re: Help with my Christmas present...I know what u'll all sa
JJsKJ wrote:
chetos wrote:
JJsKJ wrote:
chetos wrote:
So...my wife and I pick our 'big' present every year. She's either getting a dining room set or living room set the day after christmas---she wants to wait for the big sales. Here's my choices:

1. God computer...I would build this myself. I already have motherboard, HD, cd and dvd drives and other misc stuff. This would be cool new alien looking case, Intel core 2 duo chip, 2 gb ram (already have 2 gb's ready), 1 gb video card (pci express) etc....God computer for me anyway.

2. BFG AT/S.

3. Bull bar, magnaflow exhaust.

I was all set to order my computer parts off of Tiger Direct until I saw Skyjump136's video of him playing in the snow. I had forgotten about my Libby until then. Now I don't know!!


Not any mention of a lift on his list. :?


This is our main vehicle right now and I have to wait until 'someone else' gets a new car before I can do that.


Yep, my coment was toward everyone else mentioning lifts.
So whatcha think? Figure out what you are gonna do? :wink:


We were only trying to help :roll:
Author:  auggy [ Sun Dec 24, 2006 2:27 am ]
Post subject: 
What do you honestly do on your computer that you need 4 gb of ram?


I used to get paid to play videogames lol and I never once had lag on this computer (which I built):

Intel P4 3.2 GHz (oc to 3.4), 1 gb of pc 3200 ram and an BFG tech nvidia geforce 6800 gt overclocked from bfg

that said .. I'm also rebuilding my computer this christmas:

Intel core 2 duo, BFG GeForce 8800GTS 640MB PCI Express, 1 gb ddr2 800, 2 wd raptor sata hdds, asus mobo, soundblaster x-fi platinum and my personal favorite feature .. the coolermaster wavemaster case with a glass side window (as opposed to the plastic side windows my current cases have)


why the 4 gb tho? what are you doin on that thing haha
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/