Just seeing if anyone has any ideas on some quick solution for extending the front bumpstops to keep my struts from topping out. Any help would be great. Oh, and Happy New Year to all!

_________________
OH NO! I THINK WE NEED SOME "OH SH*&T HANDLES!!!!
KJ gone.
New ride
05 Rubicon Unlimited, mostly stock.Starting to add stuff.

My idea was to add about 1.5 inches of rubber to the top of the A-arm to prevent the strut from topping out. Different approach, same result.

_________________
MikeP
L.O.S.T. #000202
2021 Compass

I did that with an old hose but my darn tire kept rubbing it so I was wanting to try something different. what exactly was your approach?

_________________
OH NO! I THINK WE NEED SOME "OH SH*&T HANDLES!!!!
KJ gone.
New ride
05 Rubicon Unlimited, mostly stock.Starting to add stuff.

I used heater hose, about 1" in diameter. Two 4" sections sandwiched around a 12" section, tightly compressed then
heavy duty zip ties to attach them to the a-arm. Works great, cheap and easy. I wheeled with them on and didn't top out
the struts. If I dig up the pics, I'll post them.

_________________
MikeP
L.O.S.T. #000202
2021 Compass

I thought of screwing a chunk of rubber right to the bottom of the factory bumpstop. Countersink the screw a little.

_________________
Early '02 Limited, Steel Blue, White Guts

Call All J's and tell them you need extended front bumpstops?

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster