| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| front sway bar bushings took a crap at 22k http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=17056 |
Page 1 of 1 |
| Author: | BLANCK88 [ Mon Jan 29, 2007 1:02 am ] |
| Post subject: | front sway bar bushings took a crap at 22k |
any reason my front sway bar bushing would need to be replaced at 22k? could sand cause them to fail? |
|
| Author: | sleeve84028 [ Mon Jan 29, 2007 8:52 am ] |
| Post subject: | |
What did they look like when removed? If sand did get inbetween the bar and bushing surface, the grains could have acted like a sandpaper and wore down both the bar surface and imbedded itself in the rubber material. This is the first time I have ever heard of a bushing failure on a part that doesn't move a whole lot |
|
| Author: | Skyjump136 [ Mon Jan 29, 2007 10:30 am ] |
| Post subject: | |
Did you actually see the bushings? It is pretty typical for them to get dried out and make some noise in that amount of time. Most of the time you can just lube them up and they are good to go though. I've never heard of them going bad after 22k. |
|
| Author: | snowsport [ Mon Jan 29, 2007 12:48 pm ] |
| Post subject: | |
You can get better ones (Daystar, h.d.) at All J for $25. http://www.boulderbars.com/kjproducts.htm bottom of the page, r.h. side. |
|
| Author: | gopherbeats [ Mon Jan 29, 2007 2:11 pm ] |
| Post subject: | |
Did they actually fail mechanically: parts are no longer where they are supposed to be? or just acoustically: squeak like crazy during colder weather.. |
|
| Author: | chetos [ Mon Jan 29, 2007 3:08 pm ] |
| Post subject: | |
We sure do seem to be hearing alot about the SB bushings lately. Could this be another LBJ recall thing that has gone unnoticed?? |
|
| Author: | gone_jeepin [ Mon Jan 29, 2007 3:43 pm ] |
| Post subject: | |
chetos wrote: We sure do seem to be hearing alot about the SB bushings lately. Could this be another LBJ recall thing that has gone unnoticed??
I know, I put up a post the other day and everyone said SB bushings, I still need to grease mine since the noise is getting really annoying!!! And i would take it to the dealer but they'll just waste half a day and not fix anything, then turn to me and say "we couldn't duplicate the complaint"!!! 
|
|
| Author: | chetos [ Mon Jan 29, 2007 4:12 pm ] |
| Post subject: | |
gone_jeepin wrote: chetos wrote: We sure do seem to be hearing alot about the SB bushings lately. Could this be another LBJ recall thing that has gone unnoticed?? I know, I put up a post the other day and everyone said SB bushings, I still need to grease mine since the noise is getting really annoying!!! And i would take it to the dealer but they'll just waste half a day and not fix anything, then turn to me and say "we couldn't duplicate the complaint"!!! that's exactly what they told me when I took mine in for the noise. |
|
| Author: | Jeepjeepster [ Mon Jan 29, 2007 4:39 pm ] |
| Post subject: | |
They would never recall a part like that just b/c they make some noise. Just lube them up and be happy.
Its kinda like a squeaky door. Their not going to recall the hinges just because they squeak. 
|
|
| Author: | valvestem [ Mon Jan 29, 2007 8:54 pm ] |
| Post subject: | sb bushings |
chetos wrote: gone_jeepin wrote: chetos wrote: We sure do seem to be hearing alot about the SB bushings lately. Could this be another LBJ recall thing that has gone unnoticed?? I know, I put up a post the other day and everyone said SB bushings, I still need to grease mine since the noise is getting really annoying!!! And i would take it to the dealer but they'll just waste half a day and not fix anything, then turn to me and say "we couldn't duplicate the complaint"!!! that's exactly what they told me when I took mine in for the noise. In the mean time you can lube them with some spray silicone lube, it won't hurt the rubber. Or you can disassemble them and use some lithium base grease. |
|
| Author: | Skyjump136 [ Mon Jan 29, 2007 11:57 pm ] |
| Post subject: | |
chetos wrote: We sure do seem to be hearing alot about the SB bushings lately. Could this be another LBJ recall thing that has gone unnoticed??
No, there's no safety issue here. They technically work just fine, but need some lube once in a while. With bad LBJs you get wheels falling off so it is a completely different scenario. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|