| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| tips on trimming fender well? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=17409 |
Page 1 of 1 |
| Author: | mapco [ Wed Feb 07, 2007 7:42 pm ] |
| Post subject: | tips on trimming fender well? |
What do I need to do? My tires are rubbing on the front and rear of the well. It's a 2002 Sport. |
|
| Author: | CaKJFreedom [ Wed Feb 07, 2007 7:56 pm ] |
| Post subject: | |
A good sharp blade will do wonders on the front. Mind was rubbing forever by the fog lights. Just cut that puppy off. For the rear have you pounded down the pinch weld? (the part that sticks out like a little shark fin aiming at your tire). There's a coupld methods. Basically cut plastic, hit with a bfh to fold the weld over, reattach plastic or paint over with with an undercarriage spray. Good luck and let us know how it goes. |
|
| Author: | mapco [ Wed Feb 07, 2007 8:10 pm ] |
| Post subject: | |
OK so what exactly do I cut off in the front? And after I cut whatever needs to be cut off, what do I do then? |
|
| Author: | Maximum Carnage [ Wed Feb 07, 2007 9:44 pm ] |
| Post subject: | |
emsox wrote: OK so what exactly do I cut off in the front? And after I cut whatever needs to be cut off, what do I do then?
Here you go this might help you out. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=162361&highlight=pintch+weld#162361 |
|
| Author: | AdamIsAdam [ Mon Feb 12, 2007 10:59 pm ] |
| Post subject: | |
I did a write up years ago on my web site and this one. My link is here: http://www.cardomain.com/ride/325889/12 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|