| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Would this be too difficult... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=1795 |
Page 1 of 2 |
| Author: | OSUKJ [ Sun Sep 11, 2005 2:12 pm ] |
| Post subject: | Would this be too difficult... |
Would it be too difficult to remove the back seat and put in two front seats in the back like this liberty here. I know it sounds useless but it would be a nice mod to give the back seat passengers some more leg room and comfort as well. I've seen front seats go up on ebay for pretty cheap 
|
|
| Author: | Guest [ Sun Sep 11, 2005 2:18 pm ] |
| Post subject: | |
It would be easy. You would simply have to fab the seats mounts into the rear floor. FWIW, I would kill for the front bumper on that KJ! I like the roof rack too. |
|
| Author: | 2003KJ [ Sun Sep 11, 2005 6:23 pm ] |
| Post subject: | |
Shouldn't be that hard making the front seats adapt to the back, but what about that hole in the center where the middle seat was? for the record, that is one bad KJ! Interesting wheels on that one too, got the whole moab rim look goin on, and then some..... 
|
|
| Author: | Guest [ Sun Sep 11, 2005 6:27 pm ] |
| Post subject: | |
As for that hole, peanut butter. I think those wheels are from AEV. I've considered them myself. |
|
| Author: | n3qik [ Sun Sep 11, 2005 7:26 pm ] |
| Post subject: | |
I see the it has what looks like an 3" exhaust and rear fog lamps. Cool. Any more pics of it??? |
|
| Author: | Guest [ Sun Sep 11, 2005 7:53 pm ] |
| Post subject: | |
Here are two I snatched from Camp Jeep; 
I was hoping to use these images if I met a fab person who could design a bumper like that! IMO, it is the coolest bumper I've seen on a KJ yet. |
|
| Author: | lilmatty [ Sun Sep 11, 2005 8:21 pm ] |
| Post subject: | |
No required turn and sidemarker lights on that bumper. Definitely not street legal. |
|
| Author: | Guest [ Sun Sep 11, 2005 8:25 pm ] |
| Post subject: | |
You have a good point on t/s. Although it wouldn't be too hard to install them. As for side markers, that would simply require a trip to the big truck store for two amber rectangled reflectors (mounted on the bumper's ends). I'm curious as to those fabbed door handles. They're cool. |
|
| Author: | lilmatty [ Sun Sep 11, 2005 8:28 pm ] |
| Post subject: | |
That's one of the sweet things about AllJ's bumper. Its all built in to the design rather than hung off the side. |
|
| Author: | Ed [ Sun Sep 11, 2005 8:54 pm ] |
| Post subject: | |
That's a hot looking KJ! But where does the winch go? There doesn't look to be enough space between the fairlead and the radiator. Please tell me it wheels as good as it looks and it's not just a show-car. I love the roof bars, and the door handles are pretty funky too! |
|
| Author: | Tokyojoe [ Sun Sep 11, 2005 10:45 pm ] |
| Post subject: | |
Is that an AllJ bumper and what type of winch will fit behind it? Will the Mile Marker PE8000 fit in there? That's a lot of weight to add to the front. |
|
| Author: | Guest [ Sun Sep 11, 2005 11:35 pm ] |
| Post subject: | |
Well let me see if I can answer a few questions and clear some stuff up... I spent probably close to two hours scoping this thing out at the PA Jeep Show a few months ago... First the handles on the door They are simply holes drilled in a nice straight line in the standard handle... other then that they are the same The Rack Seemed kinda flimsy ... and worthless only for looks as the top was a retractable roof... canvas kinda like the VW Van I think... The Bumber was a one off... there was a winch behind it... didn't look to big. The turn signals are now in the lights.. no idea how.. but it looked neat The thing had no front drive shaft and cameras mounted underneath and ont he passenger side view mirror and about a 5 or 7 inch LCD where the rear view would be... they didn't start it to move in and out of the trailer ... so I will assume that was because the the drive shaft problems... Here are the pictures I have http://community.webshots.com/album/406861667 Mike |
|
| Author: | Ed [ Mon Sep 12, 2005 12:14 am ] |
| Post subject: | |
Thanks for the info, sounds like it's just a show car then. Shame. I can't seem to get at your webshots album though? |
|
| Author: | Guest [ Mon Sep 12, 2005 12:30 am ] |
| Post subject: | |
Fixed it.... man am I tired... heres the right one in case you miss it http://community.webshots.com/album/406861667 Mike |
|
| Author: | PitViper [ Mon Sep 12, 2005 5:57 am ] |
| Post subject: | |
I wounder how strong that diff cover is. |
|
| Author: | Blue KJ in PA [ Mon Sep 12, 2005 7:33 am ] |
| Post subject: | PAJeep show |
Hey, was looking at all those pics of the Jeep show in York. Was that Saturday when the Silver Grand was flipped. Did he break something or was that just some hotdoggin that got him flipped. I was there later in the day Sat afternoon and don't remember seeing anyone have any trouble on that corner at all. |
|
| Author: | Guest [ Mon Sep 12, 2005 10:01 am ] |
| Post subject: | |
Yeah he went up on the corner too high... and down he went..... then he broke something.... actually you will see the back bumper was off...it was from coming out of the bowl.... Mike |
|
| Author: | CarNutCertifies [ Mon Sep 12, 2005 12:28 pm ] |
| Post subject: | |
I like the hood, and the gas cap, plus the fore mentioned stuff |
|
| Author: | KW AV8R [ Tue Sep 13, 2005 2:04 am ] |
| Post subject: | |
If I'm not mistaken, that Jeep is the Liberator which is the Liberty CRD concept built by AEV, Jeep, and someone else. It was only intended for show and will be crushed in the near future due to legal reasons. |
|
| Author: | Guest [ Tue Sep 13, 2005 4:25 pm ] |
| Post subject: | |
KW AV8R wrote: If I'm not mistaken, that Jeep is the Liberator which is the Liberty CRD concept built by AEV, Jeep, and someone else. It was only intended for show and will crushed in the near future due to legal reasons.
Correct!! Stinks that they have to crush it!!! Mike |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|