| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Tail Light http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=18281 |
Page 1 of 1 |
| Author: | FastTRX [ Mon Mar 05, 2007 3:04 pm ] |
| Post subject: | Tail Light |
Anyone ever replace a rear tail light assembly? I'm just wondering because I cracked the outside reflector plate (cover/red part) backing into my dads truck yesterday  and I was wanting to know if I could order that as a replacement part or if I would have to just order the whole tail light assembly. I hoping thats not the case. Hopefully someone can help me...Thanks!
|
|
| Author: | sleeve84028 [ Mon Mar 05, 2007 3:08 pm ] |
| Post subject: | |
You probably will have to order the whole assembly since that cover is glued (or welded or fused) on to the backing plate... Try ebay or a junk yard for an original without having to pay full price for a new Mopar piece |
|
| Author: | tjkj2002 [ Mon Mar 05, 2007 3:12 pm ] |
| Post subject: | |
removing the taillamps is real easy,open rear swinggate and remove 2 (t20 I think) torx bit screws and pull out.Then unlpug wires and put new one in.You do need a whole taillight assembly,junkyard(like sleeve84028 said) would be the best bet. |
|
| Author: | Edwin [ Mon Mar 05, 2007 3:42 pm ] |
| Post subject: | |
I replaced my rear tailight, and it came all together with bulbs. I bought it off of E-bay, brand new in the box Mopar. I don't remember what I paid for it, but I'm thinkin it was about half of a dealership one. |
|
| Author: | FastTRX [ Mon Mar 05, 2007 3:43 pm ] |
| Post subject: | |
Ok...I figured I would have to go look for one at the junkyard. Thanks for the replies guys. |
|
| Author: | csukoh78 [ Sat May 05, 2007 11:53 am ] |
| Post subject: | |
I just replaced one of mine today. I backed into a tree while trailing *thanks partner* Picked up a replacement for $50 shipped on ebay! Anyway, couldnt be easier. The problem I ran into was that the white grommet that the two swell plugs fit into was shattered, so I only have one at the bottom, but the two torx screws (T20) hold it in tight. One thing I love about Jeeps is that they seem really, really easy to work on. D |
|
| Author: | Dje Ryu [ Sat May 05, 2007 1:00 pm ] |
| Post subject: | |
csukoh78 wrote: One thing I love about Jeeps is that they seem really, really easy to work on.
D Yup, me too. Except for the UCA on the driver's side... that took waaay too long. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|