Need help big time installing bull bar*Im about to give up*

02LibertyLimitedChick · **Posted:** Wed Feb 28, 2007 9:00 pm

I'm trying to install a bull bar on my Liberty and I am having a hard time finding where I mount it to!!! I bought it from a private seller, and I can't find any instructions anywhere! Help please! Thanks

JJsTJ · **Posted:** Wed Feb 28, 2007 9:08 pm

What brand bull bar is it? ARB full bumper? or one of those add on kind that bolts to the stock bumper/tow hooks?

Jeepjeepster · **Posted:** Wed Feb 28, 2007 9:17 pm

JJsKJ wrote:

What brand bull bar is it? ARB full bumper? or one of those add on kind that bolts to the stock bumper/tow hooks?

Its the kind that bolts to the took hook area. I believe it also mounts to the skid plate area though. Hard to tell from the pic.

http://pg.photos.yahoo.com/ph/sfreddy9/ ... pg&.src=ph

Jeep Dawg · **Posted:** Wed Feb 28, 2007 10:05 pm

hey man you have kinda the same bull bar as i do. I hope this will help you out here.

Jeep Dawg · **Posted:** Wed Feb 28, 2007 10:09 pm

Take a look at these pictures. Maybe they will give you an idea where everything goes.

AND

If you need any other help with the mounting, email me

Code:

brian@luken.150m.com

. It is a real pain in the stupid to install if you have tow hooks like me. I could help you though it.

Jeepjeepster · **Posted:** Wed Feb 28, 2007 10:14 pm

ahh, ok, I was kinda close. Looks like it mounts in the same area as the air dam and not around the skid.

Jeep Dawg · **Posted:** Wed Feb 28, 2007 10:29 pm

pretty much. I took off the spoiler because it was kinda in the way and plus the jeep looks better with out it. But along the spoiler bottom, you will find 2 threaded holes. that is where the bolts will go for the bottom bull mounts.

Did the picture help you at all?

I am glad that I took pics when I was doing it for future refs....

02LibertyLimitedChick · **Posted:** Thu Mar 01, 2007 8:09 am

Jeep Dawg wrote:

pretty much. I took off the spoiler because it was kinda in the way and plus the jeep looks better with out it. But along the spoiler bottom, you will find 2 threaded holes. that is where the bolts will go for the bottom bull mounts.

Did the picture help you at all?

I am glad that I took pics when I was doing it for future refs....

THANK YOU! I'll let u know when we get it on!!!!

JJsTJ · **Posted:** Thu Mar 01, 2007 8:35 am

WTG JEEP DAWG!! Nice work helping out!

KJ_Dave · **Posted:** Thu Mar 01, 2007 9:15 am

That is one of the main purposes of this site is to help other members have a better time with thier KJ. It shows a lot of comradery around here.

Jeep4me99 · **Posted:** Thu Mar 01, 2007 9:44 am

I got that same bull bar, instructions came in mexican, basically a poorly drawn diagram with jibberish. I took the spolier off as well, it was in the way. Drilling the bottom mounts into the cross member was kind of a pain too.

Maximum Carnage · **Posted:** Thu Mar 01, 2007 10:31 am

Quote:

THANK YOU! I'll let u know when we get it on!!!!

You know the drill by now, so show some pics whene your done installing it. [/quote]

CJ10chris · **Posted:** Thu Mar 01, 2007 4:37 pm

"instructions came in mexican" :lol:

BVCRD · **Posted:** Thu Mar 01, 2007 5:03 pm

CJ10chris wrote:

"instructions came in mexican" :lol:

That's not good. I can read spanish, but I have a hard time when there are NO words and I have to try to figuer out the poorly drawn diagrams.

Jeep Dawg · **Posted:** Thu Mar 01, 2007 8:00 pm

From my experience doing the bull bar with the CHEEZY directions that I could not read and the pictures were in chineese. LOL
I know I had a hell of a time doing mine that was the reason why I took snap shots of it. I just knew some one would be posting help sooner or later.
The worse part of the install was the tow hook area. OH MY GOD! I was drunk by the time I got done with that

When I was looking at the spoiler, I said to my self, YOUR DONE! say good bye.

Jeep Dawg · **Posted:** Thu Mar 01, 2007 8:01 pm

JJsKJ

Thanks man. I do my best to help out others

02LibertyLimitedChick · **Posted:** Sat Mar 03, 2007 4:46 pm

Ok we're trying again.....he is having a hard time finding how the holes line up to mount the bottom brackets.....SO frusteratin

02LibertyLimitedChick · **Posted:** Sat Mar 03, 2007 4:58 pm

I dunno what you call this piece exactley but we're taking it off cuz it seems to be in the way......hpefully this will help

Blue KJ in PA · **Posted:** Sat Mar 03, 2007 5:26 pm

That is classfied as extra plastic crap...left mine off when I trimmed the bumper cover after putting on my front hitch

02LibertyLimitedChick · **Posted:** Sat Mar 03, 2007 5:30 pm

Blue KJ in PA wrote:

That is classfied as extra plastic crap...left mine off when I trimmed the bumper cover after putting on my front hitch

yea well now hes having a hard time gettin THAT darn thing off without half breakin my bumper....Im about to SCREAM. I really dont think were gonna be able to get this thing put on.

Need help big time installing bull barIm about to give up

Who is online