| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Removal of Turn Signal Housing http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=19488 |
Page 1 of 1 |
| Author: | callaway [ Mon Apr 09, 2007 3:07 pm ] |
| Post subject: | Removal of Turn Signal Housing |
I have some condensation build up on the inside of my front left turn signal and want to wipe it away (mainly it looks bad). Has anyone taken off the colored plastic part of the turn signal or at least know how to do so? |
|
| Author: | FastTRX [ Mon Apr 09, 2007 3:28 pm ] |
| Post subject: | |
Should be one star-hex screw...easy removal. Just need that tool (dont know what size hex/star bit) to remove the screw and the blinker assembly will pop right out. A clip holds it on the other side. You then can slide the bulb and wires to the side to remove it from the lense. Should be good to go. |
|
| Author: | callaway [ Mon Apr 09, 2007 4:32 pm ] |
| Post subject: | |
FastTRX wrote: Should be one star-hex screw...easy removal. Just need that tool (dont know what size hex/star bit) to remove the screw and the blinker assembly will pop right out. A clip holds it on the other side. You then can slide the bulb and wires to the side to remove it from the lense. Should be good to go.
i saw the torx screw there but wasnt all that sure it would do what i wanted. i'll give it a try tonight |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|