LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

hidden hitch install issue
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=19507		 Page 1 of 1
Author:  jetboat [ Tue Apr 10, 2007 9:57 am ]
Post subject:  hidden hitch install issue
went to install my hidden hitch last night only to find out that the nuts that are welded in my frame are not the same size as the bolts provided. Hidden Provided 12mm bolts yet my KJ's are smaller, Im guessing 10mm....Anyone else have this problem????
Author:  Jeepjeepster [ Tue Apr 10, 2007 10:12 am ]
Post subject: 
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=19505

:lol:
Author:  chetos [ Tue Apr 10, 2007 10:18 am ]
Post subject: 
That's crazy!! My HH went in just fine. I think they were 10mm but I don't remember. What year do you have?
Author:  jetboat [ Tue Apr 10, 2007 11:00 am ]
Post subject: 
why did my post show up twice....HMMMMM......Mine is an 02, glad to see Im not the only one having the problem(Said Sarcastically) seems odd that manufactures just use what ever they happen to grab. 7/16-20 and 10mm both seem closer than the 12mm they sent.
Author:  torojosco [ Tue Apr 10, 2007 6:30 pm ]
Post subject: 
does anybody have the part number and brand name for the front mounted hitch receiver? my KJ is 2002
Thanks

Torojosco
Author:  CaKJFreedom [ Tue Apr 10, 2007 8:47 pm ]
Post subject: 
Hey Jetboat,
I've got a bag of 7/16-14 bolts from when I installed my front hitch. PM me your address and how many you'd like and they're yours.
Author:  spoonplugger1 [ Tue Apr 10, 2007 10:18 pm ]
Post subject: 
The front hitch has been out of production for over a year. All companies as far as I know. Think I bought one of the last ones last summer from www.etrailer.com, the very last ones I saw listed were at www.boulderbars.com.
Author:  Cacher123 [ Tue Apr 10, 2007 10:29 pm ]
Post subject: 
I still have a front hitch available. See my post in the for sale section.

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=19033
Author:  jetboat [ Wed Apr 11, 2007 9:31 am ]
Post subject: 
CaKJFreedom appreciate the offer but I need the hitch done by the weekend. Im going to run down to Ace tonight and grab a couple different sizes. I picked up 10mm at lunch yesterday and they are too small. Im having trouble thinking that they are 7/16 when the 12mm is too big.
Author:  Dje Ryu [ Wed Apr 11, 2007 9:46 am ]
Post subject: 
12mm is closer to 1/2". Try 7/16"-14 or 7/16"-20, my guess is they're 14tpi.
Author:  chetos [ Wed Apr 11, 2007 11:09 am ]
Post subject: 
jetboat wrote:
CaKJFreedom appreciate the offer but I need the hitch done by the weekend. Im going to run down to Ace tonight and grab a couple different sizes. I picked up 10mm at lunch yesterday and they are too small. Im having trouble thinking that they are 7/16 when the 12mm is too big.


How small is the 10mm? I had a hard time getting them in until I sprayed some rust remover and scrubbed out with a toothbrush. After that they went in fine. The nuts where dirty and had some rust build up. Look at yours. ---Please don't make this juvenile--- :twisted:
Author:  Wahoo650 [ Thu Apr 12, 2007 8:29 am ]
Post subject: 
They are 12m bolts. Anything else is the WRONG size. For your trailers safety, go to the hardware, get a tap and clean out the threads. If memory serves it's actuall a 12m x 1.5 tap (but maybe a 1.25) Use one of your bolts as a guide.

For all of you out there just guessing and swapping in a different size bolt, that's just flat un-safe. This issue has been posted before as well.
Author:  jetboat [ Fri Apr 13, 2007 3:15 pm ]
Post subject: 
7/16 x14 bolted right up and tightened down nicely but, I will definatly recheck everything to make sure that there is no way it could be a 12mmand just filled in with rust
Author:  jetboat [ Sat Apr 14, 2007 6:14 pm ]
Post subject: 
YOU"RE RIGHT!!!!! They are 12mm x 1.5 I had a heck of a time getting the nuts clean enough tothread the bolts in but some PB blaster and a wire brush and you can get them in. I highly suggest that everyone running 7/16x14 replace them. 7/16x14 is teh same thread pitch as the 12mm so they thread in but they arent as tight as they need to be. Even is you torqued them to the right amount they will come loose.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/