Anyone know anything about the wheel lugs on the KJ? Im looking to maybe make some custom wheel spacers but want to buy the correct lugs (heat treated, alloy) to be safe. I have a machine shop here at work that I can mill the aluminum no problem and PEM press to seat the lugs. Just dont wanna skimp on the lugs..... Thanks in advance JD

_________________
Pre-Lowered 02 Liberty
2.5" Rustys Coil w/ Ranchos in the rear.
ARB, OME927's, 1/4 strut plate and Als Gen 4.5 Uppers in the front.
Flowmaster Super 40 Series (GONE, SO QUIET!)
245/75/16 Kumho KL-78 w/ Spidertraxxxxx
Ripped out the plastic inner wheel liners
Herculined ALLLL over.....

Check with Napa,I got replacements for my KJ a year ago.I don't off hand remember the part# but they only cost me $1.19 each,and are much better than the OEM one's.Don't go the AutoZone,Checkers,or Advance Auto they will tell you they can't get them or give you the wrong one's even though they say the part# is the right one(I went through that ordeal),Napa all the way.

SWEET, thanks for the quick reply. Ill check right now... I mean after I get done writing up some ECRs. Thanks....

_________________
Pre-Lowered 02 Liberty
2.5" Rustys Coil w/ Ranchos in the rear.
ARB, OME927's, 1/4 strut plate and Als Gen 4.5 Uppers in the front.
Flowmaster Super 40 Series (GONE, SO QUIET!)
245/75/16 Kumho KL-78 w/ Spidertraxxxxx
Ripped out the plastic inner wheel liners
Herculined ALLLL over.....