Hi all,
I recently bought on ebay this aux-on adapter for my '06 KJ:
180120906763The adapter itself works fine, BUT, it causes the Jeep's Keyless Entry System to stop working. In other words, when the aux-in adapter is connected to the factory radio (through the CD-changer port), my key-fobs do not work at all and I cannot lock /unlock the car remotely

.
If I unplug the aux-in adapter, functionality of the key-fobs returns. I have tested this more than five or six times and every time it's the same.
I have asked the seller (ebay store called GromAudio) to advise on what should I do to have both the aux-in adapter AND my Keyless Entry System working

.
In the meantime, I thought I would share this with you guys, in case any of you has any good idea.
Hi Zool,and Welcome to L.O.S.T.

Most likely the person you bought this from does'nt know much about how the system operates with keyless entry.You would probably have better luck talking to your dealer on a solution like re-programing your key fobs while this device is hooked up.I've been a auto tech. for 25 years and I have'nt seen this problem yet.Hope this helps.
Ron
Cheers,
X.