Firewall penetration

&JUSTICE4ALL · **Posted:** Mon Jul 11, 2005 11:05 pm

I had this topic book marked on the "ez" board. I just tryed to call it up and it's not there. Wish I'd printed it up. I have an 05 CRD. If I remember right the old thread said there was an unused gromet on the firewall. Help if you can. My IPF HID lights are here. going to install this weekend. Another Q: is the liberty positive (+) high beam switching?

hoss75 · **Posted:** Mon Jul 11, 2005 11:33 pm

This is one that I did save!

http://members.cox.net/corwyyn/firewall ... ation.html

&JUSTICE4ALL · **Posted:** Tue Jul 12, 2005 8:45 am

Thanks hoss.

WoodysKJ · **Posted:** Tue Jun 19, 2007 3:17 pm

Hoss,

What happened to the link? I am interested in the firewall penetration info also

skywarn · **Posted:** Tue Jun 19, 2007 3:28 pm

The link.... its gone! :shock:

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

It's here.. Kevin's famous firewall penetration.. :lol:

http://home.comcast.net/~corwyyn/firewa ... ation.html

corwyyn · **Posted:** Tue Jun 19, 2007 3:54 pm

hyedipin wrote:

It's here.. Kevin's famous firewall penetration.. :lol:

http://home.comcast.net/~corwyyn/firewa ... ation.html

Yeah, and I'm going to have to get it hosted somewhere more permanent, cuz at the end of the month that account will be going away. I'll see what I can do before that happens...

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

Is it easy to reach it from the engine side? I looked at it from a few angles but even with a coat hanger it seems tight! Is it easy to work from underneath or from up above?

Let me know if you want me to put a copy of it over at my site under projects with your name and e-mail address at the bottom

Cacher123 · **Posted:** Tue Jun 19, 2007 6:23 pm

Easiest to work a pice of coat hanger bent into an easy curve up from the inside then go outside, work your hand/arm down near the fire wall and pull the coathanger up. When your drill first grabs the grommet it WILL yank it out rather abrubtly so be ready! :shock:

KJ04 · **Posted:** Tue Jun 19, 2007 7:49 pm

hoss75 wrote:

This is one that I did save!

http://members.cox.net/corwyyn/firewall ... ation.html

Adam, you're still alive!.....

2006KJSPORT4x4 · **Posted:** Tue Jun 19, 2007 9:22 pm

notice the date...2005....sorry to burst your bubble

corwyyn · **Posted:** Wed Jun 20, 2007 2:32 am

hyedipin wrote:

Is it easy to reach it from the engine side? I looked at it from a few angles but even with a coat hanger it seems tight! Is it easy to work from underneath or from up above?

Let me know if you want me to put a copy of it over at my site under projects with your name and e-mail address at the bottom

Thanks Huseyin, that'll help a lot. I'm also going to talk to the guy who does the AZ LOST website to see if we can host it over there.

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

Allright, I am going to add it this weekend. If you have any more pictures, especially where you got it out on the engine side, please post.

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

OK. it's permanent location (until I run out of money to host my websites)

http://www.jeepprojects.com/content.php?article.50

Additionally, I wanted to find out if anyone actually ran wires through passenger side? I looked at the driver side and IT IS CROWDED..

The little plastic cap is there saying hello, and on the engine side I can see that there is a little plastic piece holding it in place. If that's the same thing, It can be removed by squeezing on the engine side. And if that's what it is, there is exact same on on passenger side (on engine side) and it is calm and quiet on that end.

unixxx · **Posted:** Mon Jun 25, 2007 3:00 am

Cool, this is the same guide I used to route my amp cables. It can always be copied to the Jeep Liberty Wikibook if hosting becomes a problem:

http://en.wikibooks.org/wiki/Jeep_Liberty

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

I didn't see the guide in there, where is it?

Anyone checked the little plastic on the passenger side? so is it the same thing?

unixxx · **Posted:** Tue Jun 26, 2007 12:01 am

The guide isn't in the book yet, but the owner can add it if they'd like.

hyedipin · **Joined:** Thu May 11, 2006 10:20 am **Posts:** 1667

Oh, sorry I misread it, I thought there was an alternative one.
Thanks.

unixxx · **Posted:** Fri Jun 29, 2007 1:01 am

With Kevin's permission, I added his guide to the Jeep Liberty Wikibook:

http://en.wikibooks.org/wiki/Jeep_Liber ... enetration

Please feel free to make any improvements.

Firewall penetration

Who is online