| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Easy cheep CO2 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=22066 |
Page 1 of 1 |
| Author: | jason thompson [ Thu Jun 28, 2007 7:06 pm ] |
| Post subject: | Easy cheep CO2 |
OK so some folks may think I am some what of a butt how ever I will every now and then decide to be a nice guy and share with the group That being said here it is the Easy Cheep CO2 set up first you need to find a gas supply house ,most towns will have one you need to purchase a 20# beverage grade CO2 bottle note that 20# bottles will be much cheeper than a 10#er because they are common in the food service ind. ,beer taps next you will need to find a welding supply house ,may be the same place there you will need to buy the CHEEPEST OXYGEN cutting regulator that has a 0-100psi range you will also need to buy a nipple and a nut to adapt the oxy reg. to fit the CO2 bottle last you need to buy a quick dissconnect and put it all togeather This is the set up that I am running right now and I love it I can run air tools ,the works the best reasons for going with the 20# beverage grade is that you will never need to pay for a recert or pressure test on the bottle when it gets close to the date just swap it out for a new one they also come with a good handle on them so you dont need to buy that If you have any questions just ask I will do what I can to answer OH I know that some one will ask but if you shop around in a bigger town this set up can be done for <$200 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|