I goofed at the bottom, cut it off short. But I don't think we will go over 150 amps anyway
Amps. = Watts divided by volts Example: 300 watts divided by 12 volts = 25 amps.
By Fulltimer at 2007-07-05
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Wire Guage Selection Chart http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=22261 |
Page 1 of 1 |
| Author: | Fulltimer [ Thu Jul 05, 2007 8:18 am ] |
| Post subject: | Wire Guage Selection Chart |
I goofed at the bottom, cut it off short. But I don't think we will go over 150 amps anyway
Amps. = Watts divided by volts Example: 300 watts divided by 12 volts = 25 amps.
By Fulltimer at 2007-07-05 |
|
| Author: | Gris [ Thu Jul 05, 2007 10:04 am ] |
| Post subject: | |
Man, I went way overboard. I have 3 individual 10g wires going to my 3 sets of Hella 75s on the roof. Total of 600 watts of lights (i replaced the 55w bulbs with 100s) / 13.5v (what I am usually running at) and you get 44amps. I single 10 gauge would have worked, not 3, bah! |
|
| Author: | Fulltimer [ Thu Jul 05, 2007 10:24 am ] |
| Post subject: | |
Better more than not enough! Not enough = FIRE 
Terry |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|