LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Highlift Jack
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=22264		 Page 1 of 1
Author:  805gregg [ Thu Jul 05, 2007 10:07 am ]
Post subject:  Highlift Jack
Anyone have and use a Highlift jack on their KJ? Where are the lift points? Do you need any special attachments? Thanks
Author:  phxtoad [ Thu Jul 05, 2007 11:27 am ]
Post subject:  Hi-lift
Not to be mean - but do a search and you'll find a ton of threads on Hi-Lifts.

Quick answers:

1. Depending on your year a 48" jack will fit under your back seat.
2. You can't use the jack on the factory rocker panels or even the factory rails without crushing them. You can use them if you have aftermarket rock rails (providing they are strong enough). If you have a rear hitch it's also possible (although really unstable/unsafe) to lift from it.
3. You can use the adaptor Hi-Lift sells for lifting from the wheel.
4. Here's a link to a dohickey I had fab'd up to work without rock rails.

http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=2005

Good luck!

TL
Author:  elephantrider [ Thu Jul 05, 2007 1:02 pm ]
Post subject: 
ive lifted my kj with the hi lift on the oem rock rails, no issues.

here's a jack action shot !

Image
Author:  Tokyojoe [ Thu Jul 05, 2007 2:46 pm ]
Post subject: 
I don't see why the stock rock rails would be crushed using a highlift jack. If you can land on them with impact, you surely could lift it up from a non-impact status. My guess would be they wouldn't be very safe to lift with since they are round and probably don't make it a stable and solid lift point if the lift barely fits on the rail.
Author:  phxtoad [ Thu Jul 05, 2007 3:40 pm ]
Post subject: 
When I wrote that I was thinking more of the flimsy nerf bars...

Maybe you are right - but I think I've read in past threads that the OEM's aren't that stout.

Prior to getting Boulder Bars, when I was experimenting with my Hi-Lift adaptor I tried it without the wood that distributes the load. As soon as I cranked it up just a hair it started bending the pinch weld immediately. I even creased the outer skin before I noticed it was happening. D'oh.
Author:  meh_kick [ Thu Jul 05, 2007 6:51 pm ]
Post subject: 
Since we're sharing, here are a couple shots of my test of the new rails.

Image
Image

Good lift points for my rig also include the front receiver hitch (with and without shackle). The rear hitch is nice if the swing gate is open or an extention is placed in the hitch.
[/img]
Author:  rkeegstra [ Mon Jul 09, 2007 11:27 am ]
Post subject:  Re: Hi-lift
phxtoad wrote:
1. Depending on your year a 48" jack will fit under your back seat.


[Hey phxtoad!]

Can you be more specific, i.e. can my 2006 fit a 48" under the back seat? Good to know before I buy one.

Russ
Author:  phxtoad [ Mon Jul 09, 2007 11:35 am ]
Post subject:  Under Seat
Wow - I'm not sure on an '06 - please chime in anyone. I think they modified the rear seat so that it folded flatter than on the early KJ's. I think I remember posts saying this limited fitting a Hi-Lift under there...

As it is, I still have to pull mine out if I fold my seat down. Since I also stuff a bunch of the other gear under the seats.

TL
Author:  ATXKJ [ Mon Jul 09, 2007 2:12 pm ]
Post subject: 
48" Hilift will fit under the backseat of an 05 and I think that's when they changed the seat design.
(although don't try to fold it down afterwards)
Author:  06LTD [ Mon Jul 09, 2007 9:43 pm ]
Post subject: 
A 48" will fit under my rear seat, but like all the others, the seat wont fold down.

Steve
Author:  rkeegstra [ Tue Jul 10, 2007 1:17 am ]
Post subject: 
Excellent. Grazie, y'all.

Russ
Author:  805gregg [ Tue Jul 10, 2007 10:17 am ]
Post subject: 
Thanks Todd I will build the jack adaptor this week, and of course I owe you a good beer.
Author:  phxtoad [ Tue Jul 10, 2007 11:31 am ]
Post subject:  Mmmm
Mmmmm Beeeeeeer
Mmmmm Tequuuiiila
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/