| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Sport model fender flare question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=22762 |
Page 1 of 1 |
| Author: | crimsonfox [ Mon Jul 23, 2007 8:34 pm ] |
| Post subject: | Sport model fender flare question |
I recently noticed my rear driver side fender is sagging. Upon further inspection I found that 2 mounting clips that attach the fender flare to the jeep are broken. Is it possible to replace the clips? Or do I have to replace the whole fender flare? I haven't taken it off the car yet since it has been raining, plus I'd hate to take it off and not be able to get it back on securely. I just got the KJ about a week ago and sure enough, it was hit within 3 days of having it. Nothing like coming out in the morning to notice "something looking different" Thanks for any help you can provide. |
|
| Author: | jeepkj02 [ Mon Jul 23, 2007 11:02 pm ] |
| Post subject: | |
If your talking about the rivet it's NAPA P/N 770-2871 |
|
| Author: | spencevans [ Mon Jul 23, 2007 11:30 pm ] |
| Post subject: | |
If you're talking about the arrowhead clip that clips the fender to the sheet metal, they can only be purchased at the dealer. It's kind of a coincidence but I bought 10 from the dealer this morning for $1.10 each because I plan on breaking a few when I take off my fenders for painting tomorrow. I did not have a part number, we just looked them up on the computer. They are kind or fragile, I broke 3 a few months ago when I put on my RL rear bumper. |
|
| Author: | RQuarte [ Tue Jul 24, 2007 12:43 am ] |
| Post subject: | |
Yep you get these at the dealer, can't tell you how many times i've been up their to get these stupid things, and with all the after market stuff, still nothing to keep the cheesy fenders to stay on or even new ones. |
|
| Author: | crimsonfox [ Tue Jul 24, 2007 1:34 am ] |
| Post subject: | |
Yes, it is the clips that attach the fender to the sheet metal. How difficult is it to take off and replace those? |
|
| Author: | crimsonfox [ Wed Jul 25, 2007 6:05 pm ] |
| Post subject: | |
jeepkj02 wrote: If your talking about the rivet it's NAPA P/N 770-2871
Thanks for the info! I got the new clips installed and now I have to replace the rivets that are loose/missing. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|