| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Inside of the rear swing gate http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=22846 |
Page 1 of 1 |
| Author: | RespectMyLibertay [ Thu Jul 26, 2007 4:33 pm ] |
| Post subject: | Inside of the rear swing gate |
Anyone know how to remove the plastic on the interior of the swing gate? I want to check on my rear-wiper motor, my spare tire mount bolts and whatever is back there. When driving, there's an annoying rattle coming from the swing gate and I want to at least see if I can do something to help/fix. Any help on how to remove and reinstall that plastic interior piece of the swing gate would be greatly appreciated! 
|
|
| Author: | meh_kick [ Thu Jul 26, 2007 6:11 pm ] |
| Post subject: | |
I was told once by a smart man that there are a series of clips along the perimeter of that piece. You can start near the latch area and pop them with a little bare hand force, or with a long screw driver. I never did get around to popping mine off to fix a hole in the plastic... |
|
| Author: | Jeepjeepster [ Thu Jul 26, 2007 6:28 pm ] |
| Post subject: | |
yea, its held on by plastic clips that break easily.. The dealer broke some of mine when they did the recall for the rear flipper glass. 
|
|
| Author: | Signcutter21 [ Thu Jul 26, 2007 7:40 pm ] |
| Post subject: | |
yeap plastic clips is all. just lightly pull at the edges and it's easy to see where they are at. if you pull straight up/out where the clip is, it will reduce the chaces of it breaking. Pulled the plastic off mine multiple times without any problems. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|