LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

So. I bought a lift
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=22971
Page 1 of 1

Author:  djformi [ Tue Jul 31, 2007 3:32 pm ]
Post subject:  So. I bought a lift

and my wife almost killed me.....
I went with OME..all light..no HD or medium.
Hope to have it on soon with some decent tires and new wheels.
Also got a dual exhaust borla and a RB1!!

Author:  elephantrider [ Tue Jul 31, 2007 5:55 pm ]
Post subject: 

if you plan to run an aftermarket bumper, you'll need the hd's on the front.

otherwise, congrats on the lift ! you'll love it.

Author:  jerbacher [ Tue Jul 31, 2007 5:57 pm ]
Post subject: 

how much did you pay for the exhaust and the RB1?

is the exhaust the Mopar/Borla one?

Author:  djformi [ Tue Jul 31, 2007 6:30 pm ]
Post subject:  .

RB1 was just about 600.00
The exhaust is Borla and it was 350 shipped. So it was like 300 dollars with out the shipping.

Author:  Jeepjeepster [ Tue Jul 31, 2007 8:03 pm ]
Post subject: 

You should like that lift. I personally believe thats the height the Jeep should of been from the factory.

Author:  djformi [ Thu Aug 02, 2007 8:55 am ]
Post subject:  .

ok got my all goodies on the same day.
Although the box that the OME came in was DESTROYED!!!!! I bought it fairly used so i dunno.
Do I need anything else to install this? I see alot of people with a clevis spacer?
I am looking to go 245/75/16. I should be able to get this to fit with no problems.
Just looking for suggestions. Thanks

Author:  tommudd [ Thu Aug 02, 2007 9:01 am ]
Post subject: 

If you only bought light duty then you will need to do a clevis to fit the 245s. Light dutys are about equal to stock spring rates with about 1.5 inches of lift. I would put at least two or three conduit nuts on if you want to try and run 245s. Just my thoughts maybe someone else with light duties will chime in

tom

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/