LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Full Suspension Lift completed - however requires more at...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=23060
Page 1 of 1

Author:  richo [ Fri Aug 03, 2007 1:56 am ]
Post subject:  Full Suspension Lift completed - however requires more at...

Hi All,

I just installed a full ironman suspension kit (spring & shocks) and it gave me a pretty decent lift. It is 710mm at front & 760mm at back.

The vehicle rides really well

The funny thing is that it seems to sit really high at back and much lower at the front.

I'm from Melbourne -oz, so you dont get to see many lifted around.

What can I do to fix this??

Author:  Tokyojoe [ Fri Aug 03, 2007 2:00 am ]
Post subject: 

For SAE people, that is 2.79" front 2.99" rear

Author:  richo [ Fri Aug 03, 2007 2:08 am ]
Post subject: 

sorry, what's sae?

Author:  0311_DoC [ Fri Aug 03, 2007 5:21 am ]
Post subject: 

American standard :)

Author:  Fulltimer [ Fri Aug 03, 2007 6:51 am ]
Post subject: 

The KJ naturally sits lower in the front to start with. Someone on here will tell you what you need to do to level it out. Good luck, post some pictures.

Terry

Author:  jeepkj02 [ Fri Aug 03, 2007 9:15 am ]
Post subject: 

Do a clevis lift to level it out.

Author:  DarbyWalters [ Fri Aug 03, 2007 9:34 am ]
Post subject: 

Drive it for a bit and let it settle...then you can adjust with a "clevis" lift...mentioned in the Tech Section.


Uh, you can't make a post like this without PICS

Author:  Fouros [ Mon Aug 06, 2007 1:29 am ]
Post subject: 

is it a petrol or crd KJ

i have not heard much about the iron man kits up north mate

if its a crd your front springs are a rated for a petrol i still have 745 front 755 rear on my OME springs

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/