Full Suspension Lift completed - however requires more at...

richo · **Posted:** Fri Aug 03, 2007 1:56 am

Hi All,

I just installed a full ironman suspension kit (spring & shocks) and it gave me a pretty decent lift. It is 710mm at front & 760mm at back.

The vehicle rides really well

The funny thing is that it seems to sit really high at back and much lower at the front.

I'm from Melbourne -oz, so you dont get to see many lifted around.

What can I do to fix this??

Tokyojoe · **Posted:** Fri Aug 03, 2007 2:00 am

For SAE people, that is 2.79" front 2.99" rear

richo · **Posted:** Fri Aug 03, 2007 2:08 am

sorry, what's sae?

0311_DoC · **Posted:** Fri Aug 03, 2007 5:21 am

American standard

Fulltimer · **Posted:** Fri Aug 03, 2007 6:51 am

The KJ naturally sits lower in the front to start with. Someone on here will tell you what you need to do to level it out. Good luck, post some pictures.

Terry

jeepkj02 · **Posted:** Fri Aug 03, 2007 9:15 am

Do a clevis lift to level it out.

DarbyWalters · **Posted:** Fri Aug 03, 2007 9:34 am

Drive it for a bit and let it settle...then you can adjust with a "clevis" lift...mentioned in the Tech Section.

Uh, you can't make a post like this without PICS

Fouros · **Posted:** Mon Aug 06, 2007 1:29 am

is it a petrol or crd KJ

i have not heard much about the iron man kits up north mate

if its a crd your front springs are a rated for a petrol i still have 745 front 755 rear on my OME springs

Full Suspension Lift completed - however requires more at...

Who is online