They do not fold completely flat but they are close. I would day they are ~10 degrees off (did not pull out my protractor
) from completely flat.
Boiler
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Getting all the seats to lie flat.. http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=23888 |
Page 1 of 1 |
| Author: | humptyjumped [ Wed Aug 29, 2007 9:09 pm ] |
| Post subject: | Getting all the seats to lie flat.. |
Was thinking of this. It would be cool if all the seats would lie flat. Anyone tried this? Wondering because it would be nice to make it a bed back there, I'm a tall guy so the front seats would have to fold flat too.... Any ideas? PT cruiser seats? |
|
| Author: | DarbyWalters [ Wed Aug 29, 2007 10:15 pm ] |
| Post subject: | |
New Patriot seats or KK seats maybe |
|
| Author: | JeepinG [ Wed Aug 29, 2007 11:11 pm ] |
| Post subject: | |
I sleep in mine all the time.. Put the passenger seat all the forward, put a box behind the seat to fill in the gap. Lay self inflating air matress down, place pillows as needed. It really does work well, I'm 5'10" and I can lie straight in line but there is a bit more room if I sleep diagonally. |
|
| Author: | Tokyojoe [ Thu Aug 30, 2007 1:08 am ] |
| Post subject: | |
You might want to see if you can replace them with the newer KJ rear seats. They sit almost completely flat, if my old memory serves me well. A whole lot better than the older model KJ's. They negative might be that they are not as comfortable to sit on as a passenger. For those with newer KJ's, please correct or support what I just said about how flat the seats go. |
|
| Author: | BeepBeepJeepJeep [ Thu Aug 30, 2007 7:48 am ] |
| Post subject: | |
My stepbrother has a blazer and his rear seats fold flat. They're uncomfortable for me to sit in and i'm only 5'7, I can't imagine what it'd be like for a taller person. I'm very glad my rear seats dont fold down all the way. |
|
| Author: | boilermaker2 [ Thu Aug 30, 2007 7:58 am ] |
| Post subject: | '05 seats |
They do not fold completely flat but they are close. I would day they are ~10 degrees off (did not pull out my protractor ) from completely flat.
Boiler |
|
| Author: | humptyjumped [ Thu Aug 30, 2007 8:55 am ] |
| Post subject: | |
Ya the back seat is ok.... I was thinking more of replaceing the front seats. |
|
| Author: | jsc7002 [ Thu Aug 30, 2007 9:05 am ] |
| Post subject: | |
yeah i thought of that too and i believe that PT Cruiser seats will work when i last checked i saw a drivers and pass. on ebay for 150+ shipping (i think it was about 75) and they came from an 06 i just never gat around to doing it |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|