installed an '04 evic (R2D2)on my '03 jeep liberty it well not keep any setings after turning off my jeep. I could use some help

_________________
2003 Jeep Liberty Sport, 3.7 4x2
Miles=234,000
All-J 3" frankenlift
245x70x16
fastman T/B
B&G flash upgrade
PML Diff. cover
Mopar front tow hooks
mopar dash grab handle
All-J superskid I
Misch 4x4 big boy seat brackets

This originally was more of instalation how to but if you follow the threads you may eventually find some answers, that could help you.

Go To: http://www.jeepkj.com/forum/showthread.php?t=25616

I hope it gives you some answers good luck

I would think you have a wire hooked up wrong. One should be connected to a 'always on' power source, maybe.

_________________
2005 4x4 Sport
Yakima Low Riders
Hidden Hitch
MOPAR tow hooks
RL Skink Step Sliders
Magnaflow
3/4 armored
235/70/16 Grabber AT 2
and a lot of little stuff...

i rechecked the wires per http://theblakbox.com/lost/evic/ looks o.k. i will stright power on friday

_________________
2003 Jeep Liberty Sport, 3.7 4x2
Miles=234,000
All-J 3" frankenlift
245x70x16
fastman T/B
B&G flash upgrade
PML Diff. cover
Mopar front tow hooks
mopar dash grab handle
All-J superskid I
Misch 4x4 big boy seat brackets