This originally was more of instalation how to but if you follow the threads you may eventually find some answers, that could help you.
Go To: http://www.jeepkj.com/forum/showthread.php?t=25616
I hope it gives you some answers good luck
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| evic help http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=24278 |
Page 1 of 1 |
| Author: | drew4406 [ Tue Sep 11, 2007 10:54 pm ] |
| Post subject: | evic help |
installed an '04 evic (R2D2)on my '03 jeep liberty it well not keep any setings after turning off my jeep. I could use some help |
|
| Author: | Rush345 [ Wed Sep 12, 2007 1:01 am ] |
| Post subject: | I don't know if this helps |
This originally was more of instalation how to but if you follow the threads you may eventually find some answers, that could help you. Go To: http://www.jeepkj.com/forum/showthread.php?t=25616 I hope it gives you some answers good luck
|
|
| Author: | chetos [ Wed Sep 12, 2007 10:07 am ] |
| Post subject: | |
I would think you have a wire hooked up wrong. One should be connected to a 'always on' power source, maybe. |
|
| Author: | drew4406 [ Thu Sep 13, 2007 1:03 am ] |
| Post subject: | |
i rechecked the wires per http://theblakbox.com/lost/evic/ looks o.k. i will stright power on friday |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|