LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

ARB Measurements
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=25492		 Page 1 of 2
Author:  jsc7002 [ Tue Oct 16, 2007 11:55 am ]
Post subject:  ARB Measurements
How much does the ARB weigh?
How many bolts hold the bumper to the frame?
Does anyone have pics iof the inside of the ARB?
And can someone with an ARB get some measurements for me?
I need the length where the green lines are


Image

Thanks for all your help!
Author:  tjkj2002 [ Tue Oct 16, 2007 12:19 pm ]
Post subject: 
The ARB is about 85-90lbs without a winch and there is 10 bolts holding the subframe to the unibody and then 6 bolts holding the cover to the subframe(yes the ARB is 2 pieces).As far as measurements I'm to lazy to walk the 100ft to my Jeep for those.
Author:  tommudd [ Tue Oct 16, 2007 12:25 pm ]
Post subject: 
Well I had to walk from my home office, all the way down stairs and out to the garage maybe 55 feet....total, :wink: it was rough!
Author:  jsc7002 [ Tue Oct 16, 2007 12:48 pm ]
Post subject: 
wow really?! 85# thats pretty heavy they could have made the whole thing out of 3/16"

thanks alot tom, my email is jsc7002@yahoo.com

anybody know the measurement for #1?

one more thing it looks lithe the bumper covers up the bottom part of the grille slots, does it?, and roughly how much does it cover?
Author:  elephantrider [ Tue Oct 16, 2007 1:04 pm ]
Post subject: 
on the 05 models, it covers about 2" on the bottom of the grill slots.

Image
Author:  tommudd [ Tue Oct 16, 2007 3:23 pm ]
Post subject: 
tommudd wrote:
somewhere I have the instructions get me an email address and I will try and find them and send to you they have some pics of the inside of the bumper. There is a frame work that you mount to the frame which is held on with 10 bolts, then the main bumper bolts on to that

#3 is 6.5
#4 is 17 to where it starts to turn
#2 is 8.25
#1 for got to measure :roll:

tom


number 1 is about 6 inches
Author:  WoodysKJ [ Tue Oct 16, 2007 5:06 pm ]
Post subject: 
Question:

Why all the messurments?

The box it comes in wont be big enough to put your wife in when she finds out what you have spent and threatens to...

I have seen too many CSI episodes.

Sorry for the rant.


But why the need for messurments?
Author:  WoodysKJ [ Tue Oct 16, 2007 5:07 pm ]
Post subject: 
Jason,

what happened to your horn cover on the drivers side?
Author:  WoodysKJ [ Tue Oct 16, 2007 5:09 pm ]
Post subject:  Re: ARB Measurements
Who's ARB is this, Linex? Herculiner? what is it coverd in?

DETAILS PLEASE

Image

Thanks for all your help![/quote]
Author:  tjkj2002 [ Tue Oct 16, 2007 5:13 pm ]
Post subject:  Re: ARB Measurements
WoodysKJ wrote:
Who's ARB is this, Linex? Herculiner? what is it coverd in?

DETAILS PLEASE

Image

Thanks for all your help!
[/quote]A really bad Herculiner job.
Author:  WoodysKJ [ Tue Oct 16, 2007 5:16 pm ]
Post subject: 
it looks like a pretty bad job, but who's
Author:  WoodysKJ [ Tue Oct 16, 2007 5:17 pm ]
Post subject: 
how's my Gecko comming?
Author:  tommudd [ Tue Oct 16, 2007 5:18 pm ]
Post subject:  Re: ARB Measurements
tjkj2002 wrote:
WoodysKJ wrote:
Who's ARB is this, Linex? Herculiner? what is it coverd in?

DETAILS PLEASE

Image

Thanks for all your help!
A really bad Herculiner job.[/quote]

you just said what I was thinking all along, man that stuff must add 50 lbs as thick as it looks :lol:
Author:  WoodysKJ [ Tue Oct 16, 2007 5:20 pm ]
Post subject: 
As thick as it is, no wonder he needs accurate messuments from another bumper.
Author:  tommudd [ Tue Oct 16, 2007 5:22 pm ]
Post subject: 
WoodysKJ wrote:
As thick as it is, no wonder he needs accurate messuments from another bumper.


:lol: :lol: :-)r
Author:  elephantrider [ Tue Oct 16, 2007 5:54 pm ]
Post subject: 
WoodysKJ wrote:
Jason,

what happened to your horn cover on the drivers side?


i took it off. most of the time if there is a dumbarse driver, i just use my finger, not the horn.

:twisted:
Author:  jsc7002 [ Tue Oct 16, 2007 6:23 pm ]
Post subject: 
lol not my bumper, just one I found on cardomain

Im trying to get some measurements b/c im in the process of making my own bumper and I was wondering what the deminsions were to get some ideas
Author:  WoodysKJ [ Tue Oct 16, 2007 8:49 pm ]
Post subject: 
Ah, Just what I suspected Patent infringment.

Cool dude take pics, LOTS of PICS
Author:  jsc7002 [ Tue Oct 16, 2007 9:00 pm ]
Post subject: 
WoodysKJ wrote:
Ah, Just what I suspected Patent infringment.

Cool dude take pics, LOTS of PICS


:wink: what else is a poor college student to do? :lol: i will take alot of pics for ya tho, i think im gonna make it out of 3/16" kinda like christopher's or RL's but thicker and more like ARB's
Author:  grumppee [ Tue Oct 16, 2007 10:47 pm ]
Post subject: 
That's my KJ; and I do not have a cardomain account.

http://home.cogeco.ca/~chriscannon/JEEP ... erty13.jpg
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/