| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| spare bolt size http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=25636 |
Page 1 of 1 |
| Author: | hardhittinz [ Fri Oct 19, 2007 10:27 pm ] |
| Post subject: | spare bolt size |
what size socket do i need to remove my spare? |
|
| Author: | tjkj2002 [ Fri Oct 19, 2007 10:33 pm ] |
| Post subject: | Re: spare bolt size |
hardhittinz wrote: what size socket do i need to remove my spare? Should be the same size as your other tires,3/4" socket and you may need the lock key if you have the locking lug nut on your spare.
|
|
| Author: | hardhittinz [ Sat Oct 20, 2007 7:50 pm ] |
| Post subject: | |
thanks |
|
| Author: | Cacher123 [ Mon Oct 22, 2007 7:52 pm ] |
| Post subject: | |
Maybe a dumb question, BUT, some of the chrome caps have fallen off my lugs so the bare lug nuts are exposed. Does this change the size of the lug socket required? I imagine it would. Anyone know what size? |
|
| Author: | Jeep Dawg [ Mon Oct 22, 2007 8:04 pm ] |
| Post subject: | |
it might change some what but Not enough to put you in a bind. I have had them fall off of other jeeps I owned in the past and never had any problems with the lugs and my 4way bar. You should be ok |
|
| Author: | snowsport [ Mon Oct 22, 2007 10:10 pm ] |
| Post subject: | |
When a couple fell off mine, I tried to get a nut off with the lug wrench. It grabs, then lets go and rounds off the hex head. I had to get an 18 mm (I think it was) and hammer it onto the stripped nut and then wrench it off. Not too bad of a PITA, but it would have been if I hadn't had that smaller socket handy. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|