I'm trying to remove the silver trim around the radio/heater on my Liberty. The top half has come loose and seems to be fastened with the clips that I'm used to seeing on such applications. The bottom seems to be held tightly enough that I fear I may damage it if I pull any harder. Is there a fastener that I'm missing or should I just YANK on it?

Thanks,

Dean

there is a philips head screw in the bottom that holds the bezel on. You may need to put your head down by the shifter to see it. It is pretty much right in the middle, directly to the left of the cigar lighter port

_________________
L.O.S.T. #225019
2003 Sport 4x4
Patriot Blue w/ trail rash
Flex-Zilla 4" Lift
TrailRash hi-lift mounts
Other stuff you wish you had

if he's got an '02, it's inside the ash tray.

Thanks Jeep4me...Sorry I thought I had updated my Sig..Should work now!

_________________
'06 Liberty Limited CRD Blue
'05 Dodge 3500 Cummins
'95 Chevy K2500 6.5 TD
Old trucks and Pontiacs!!

yep, '02 echo that. Screw behind ash-tray...gotta take that out. And then the cig lighter as well. Just comes apart on some snaps. Easier to get done once you take off the rest though

_________________
T.J. N
07 KJ; 2.5" RRO lift + 1/2" clevis lift & xtra isolators; 245/75R16 Dayton Timberline MT's;
ProComp ES3000 shocks; ProComp Explorer 5" driving lights; Mopar Tail light guards,
grille inserts, roof x-bars, tow hooks; full Mopar plus custom skids, custom spare tire riser;
Magnum hood deflector
soon: winch in factory front bumper...