| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Remove dash trim?? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=25773 |
Page 1 of 1 |
| Author: | Hoosierdaddy [ Tue Oct 23, 2007 9:27 pm ] |
| Post subject: | Remove dash trim?? |
I'm trying to remove the silver trim around the radio/heater on my Liberty. The top half has come loose and seems to be fastened with the clips that I'm used to seeing on such applications. The bottom seems to be held tightly enough that I fear I may damage it if I pull any harder. Is there a fastener that I'm missing or should I just YANK on it? Thanks, Dean 
|
|
| Author: | Jeep4me99 [ Tue Oct 23, 2007 9:31 pm ] |
| Post subject: | |
there is a philips head screw in the bottom that holds the bezel on. You may need to put your head down by the shifter to see it. It is pretty much right in the middle, directly to the left of the cigar lighter port |
|
| Author: | Guest [ Tue Oct 23, 2007 9:59 pm ] |
| Post subject: | |
if he's got an '02, it's inside the ash tray. |
|
| Author: | Hoosierdaddy [ Tue Oct 23, 2007 10:13 pm ] |
| Post subject: | |
Thanks Jeep4me...Sorry I thought I had updated my Sig..Should work now! |
|
| Author: | slikjr [ Tue Oct 23, 2007 11:21 pm ] |
| Post subject: | |
yep, '02 echo that. Screw behind ash-tray...gotta take that out. And then the cig lighter as well. Just comes apart on some snaps. Easier to get done once you take off the rest though |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|