| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Removing the Knee Blocker ? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=25876 |
Page 1 of 1 |
| Author: | LimitedLurker [ Sat Oct 27, 2007 4:29 am ] |
| Post subject: | Removing the Knee Blocker ? |
I have an 02 with a loose wire behind the driver’s dash. Its been rattling/ buzzing so I’m trying to get the knee blocker off to get a look to see what’s going on. Anyone know how to get the blasted thing off? I can release the bottom clips but the tops won’t let go. Is there a trick or do I just need to man up and give it a really good pull? I’ve pulled hard but I’m afraid I’ll snap something off. The service manual is useless for this task. To release the bottom I pull up on the knee blocker panel until I can grab the bottom edge and pull out. The bottom clip pops but I can’t get the top to release. I’ve got the top panel off and removed the instrument cluster so I think I can see the problem but I can’t drive this way. I wanted to get the knee blocker off so it would be easy to play around while testing driving. |
|
| Author: | bearmedic [ Sat Oct 27, 2007 5:23 am ] |
| Post subject: | |
there should be two screws holding it in behind the molding trim |
|
| Author: | myjeepwalks [ Sat Oct 27, 2007 9:58 am ] |
| Post subject: | |
Dont think there are any screws holding it on. It's a mofo to get that thing off. I stick a door panel removal door in the top and then just twist it. The knee panel then just pops off. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|