LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

New Lights!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=26325
Page 1 of 1

Author:  jsc7002 [ Thu Nov 08, 2007 3:23 pm ]
Post subject:  New Lights!

I installed these in about 10 min. but I dont have them wired yet, I need a lil help doing that, I need to know which wires are which from the stock pigtail except for the turn signals, im going to cut off the plug from the stock wires but what goes to what? from stock to new?? there are three wires black, red and green, Im guessing red=power, black=ground and green=??
STOCK WIRES
Image

NEW WIRES
Image

Image

Image

Image

Image

Image

Author:  WoodysKJ [ Thu Nov 08, 2007 3:33 pm ]
Post subject: 

Do you have a circuit tester?

Connect it to a ground and use the pointed end to see which circuit is which.

Theory: Red is for the turn signals HOT and Green is for the Parking Light HOT and black is for the common ground to both.

I would get a tester, cheap one with a point on it like an ice pick, and connetct to a ground, then turn on your parking lights and see which one lights up the tester. The test the other with the tunr signal activated.

DO NOT GUESS

Author:  jsc7002 [ Thu Nov 08, 2007 3:35 pm ]
Post subject: 

man! clever lol im retarded ill go try that, I wouldnt guess and check that was my theory, but yours sounds better :lol:

Author:  WoodysKJ [ Thu Nov 08, 2007 3:41 pm ]
Post subject: 

Those little 5.00 testers come in VERY handy for many little jobs. Well worth the money.

Author:  jsc7002 [ Thu Nov 08, 2007 4:42 pm ]
Post subject: 

ya they are, ill post some pics later tonight with the lights on, nothin great looking tho just new lights, i thought about LED but man those arent cheap!

Author:  WoodysKJ [ Thu Nov 08, 2007 4:53 pm ]
Post subject: 

Tghey also don't work with standard flashers. They draw too little current to activate the flashers and can cause a malfunction. New flashers aren't cheap either.

Author:  jsc7002 [ Thu Nov 08, 2007 5:02 pm ]
Post subject: 

lol no they werent!!

Author:  tommudd [ Thu Nov 08, 2007 5:30 pm ]
Post subject: 

LEDs will work if you only have them on one end of the system like just fronts, but not both , there are several ways/ little tricks around it including having the regular bulb still in the system but behind the bumper or something with just the LED showing. LEDs are way cheaper in the long run and look way cool as well Uou can also buy a flasher that will work and the prices are coming down on them finally.

Author:  Rush345 [ Thu Nov 08, 2007 10:49 pm ]
Post subject: 

tommudd wrote:
LEDs will work if you only have them on one end of the system like just fronts, but not both , there are several ways/ little tricks around it including having the regular bulb still in the system but behind the bumper or something with just the LED showing. LEDs are way cheaper in the long run and look way cool as well Uou can also buy a flasher that will work and the prices are coming down on them finally.

Enlighten me OH wise one after checking with superbriteleds.com I acertained I need 2 ea. 3157 white, 1 ea. 921 red, 4 ea. 3157 amber, 4 ea. 3157 red, 2 ea. 168 amber, I'm also considering 2 PIAA's 9005 to put in the stock fog location, but upon hearing that i needed a different relay for the flashers they're response was we sell relays , we sell bulbs the application process is your problem :evil: Can we say customer service?? I don't think so :evil: anyway any advise would be appreciated this is on my Santa bring me list. :D :lol: :twisted:

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/