| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| drive shaft universal joint http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=26432 |
Page 1 of 1 |
| Author: | Christopher [ Sun Nov 11, 2007 12:36 pm ] |
| Post subject: | drive shaft universal joint |
I wanted to get some new u joints for the rear drive shaft. When I went to the parts store they asked me what size and that there are two differnent sizes. Anybody know the difference? Christopher |
|
| Author: | Albert [ Sun Nov 11, 2007 12:45 pm ] |
| Post subject: | |
That doesn't sound right......unless the CRD takes a bigger one due to the extra torque. I am just guessing. Call a Jeep dealer and see what they say. You don't have to buy it there but you can get info and a price and a part # from them. |
|
| Author: | Christopher [ Sun Nov 11, 2007 12:51 pm ] |
| Post subject: | |
Check that out, two diff sizes. http://www.autozone.com/N,11200178/shop ... ultSet.htm Christopher |
|
| Author: | Cowcatcher [ Sun Nov 11, 2007 1:07 pm ] |
| Post subject: | |
If you PM me your email I can send you a snap of the parts page so you can figure out which one. I can't but am guessing that it is the 5 speed auto that changes the number. EDIT: I think it is a CommandTrac/SelecTrac/Manual Tranny thing upon closer look. The 05015694AA seems to always be used in the back and the other one is used on the front on the manual and in a fe other applications. |
|
| Author: | Christopher [ Sun Nov 11, 2007 4:08 pm ] |
| Post subject: | |
pm sent Thanks |
|
| Author: | Cowcatcher [ Sun Nov 11, 2007 5:52 pm ] |
| Post subject: | |
Christopher wrote: pm sent
Thanks Sending what I had but likely the wrong info for your year. You might go here and see if Sam has something better: http://www.lostjeeps.com/forum/phpBB3/vie ... hlight=fsm |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|