what tools have you used to trim the inner wheel walls? thanks

A Dremel tool with a cutting disc. It'll melt the plastic more as you cut it, but it works great. Then clean-up with a simple rasp file.

TL

_________________
95 YJ 2.5" RE lift and 32's, Posi-Lock, 4.10's with a Tru-Trac up front, M8000 winch, CB, gear and what have you...
RIP: 02 KJ LE

thank you. i figured as much. but it's alway's best to run it past the L.O.S.T guy's.

I used a utility knife with a new blade. Once scored once or twice, the blade follows and will cut through. This worked best for me as I didn't have a dremel tool to use.

_________________
'04 Renegade 4x4
L.O.S.T. #058466
Car Domain, Updated: 2/23/2009
===_oooo
(_l_|_,\____\,_
{----__---_(olllllllo)
()_)"""""()_)--"--)_)

I've heard that heating with a heat gun, then cutting with a utility knife works really really good. Just "cuts like butter", to quote tommudd and Sean150 who told me about it. I didnt do that though, so no first hand exp.

_________________
-Jon-
02 Jeep Liberty - LOST Trail Tested Edition - sold
09 VW Tiguan 4motion - current

You are so right Jon thats what I did and worked well, just heat the plastic with a heat gun some and a utility knife will slid right through.

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

i think ill save myself 100 bucks and get the 24 dollar heat gun. thank u.

You can heat it up with a butane torch and a blower attachment too. Just don't get carried away or it will melt. Really easy to cut after heating it up. They're pretty cheap also.

_________________
June 2001 Liberty Limited 4X4
Frankenlift II Premium, Al's Upper Arms, 245/75R16 C Silent Armors on Moabs, RL Skink Super Sliders, Rear DTT, Riddler Diff Cover, Fastman Throttle Body, Profinish-Proglass Hood, Borla Dual Outlet Exhaust, TransGo Reprogramming Kit, APS Stall Converter, 4.10 Gears, B&G Chrysler PCM, Lots of Line-X, etc...

Buy a Dremel tool kit for sale at Target for $50, plus then you get a new tool!

_________________
-Great spirits have always encountered violent opposition from mediocre minds. -Einstein
-'07 KJ Sport
-Skink Super Sliders, Mopar Skids, Huskys, 245/70 16 Grabber AT2s, Hooks, Warholamo Rails, Black Widow Roof Rack
-Up Next: Lift?