LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

any idea how I would aquire an ARB bull bar in Germany?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=26867		 Page 1 of 1
Author:  mapco [ Sun Nov 25, 2007 10:24 am ]
Post subject:  any idea how I would aquire an ARB bull bar in Germany?
:? I have to have one!
Author:  ATXKJ [ Sun Nov 25, 2007 10:40 am ]
Post subject: 
Call All J's (on California time) - they had a thread earlier with someone in France that they sent boulder bars

however shipping may be more than the ARB
http://www.boulderbars.com/kjproducts.htm


You might have better luck checking 4x4 places in Germany - there are some - might save on shipping
Author:  mapco [ Sun Nov 25, 2007 11:08 am ]
Post subject: 
well darn, if someone could tell me of a 4x4 shop in my area, I'll go check it out.

help!
Author:  WoodysKJ [ Sun Nov 25, 2007 11:09 am ]
Post subject: 
I would think it would be MUCH cheaper to get it straight out of Australia rather than ship it from California or anyplace else from the states. I would contact the guys ARB in Washington, or Seth, and ask them the best way to get one out of Australia.
Author:  ATXKJ [ Sun Nov 25, 2007 11:52 am ]
Post subject: 
scroll down to LOST in France (no LOST in Germany yet) - several of the folks posting are in Germany - send them a PM.
Author:  Pote [ Wed Nov 28, 2007 8:33 pm ]
Post subject: 
WoodysKJ wrote:
I would think it would be MUCH cheaper to get it straight out of Australia rather than ship it from California or anyplace else from the states. I would contact the guys ARB in Washington, or Seth, and ask them the best way to get one out of Australia.

Just an FYI...California to Stuttgard, Germany is about half the distance it is from Australia to Stuttgard. Australia is frickin far away! LOL Talking about 10K miles vs. 5.5K miles from the US. ;) Not sure how that plays out with freight costs versus US dollar versus Euros vs. Aussie currency....just talking distances here.
Author:  WoodysKJ [ Wed Nov 28, 2007 8:39 pm ]
Post subject: 
Pote wrote:
WoodysKJ wrote:
I would think it would be MUCH cheaper to get it straight out of Australia rather than ship it from California or anyplace else from the states. I would contact the guys ARB in Washington, or Seth, and ask them the best way to get one out of Australia.

Just an FYI...California to Stuttgard, Germany is about half the distance it is from Australia to Stuttgard. Australia is frickin far away! LOL Talking about 10K miles vs. 5.5K miles from the US. ;) Not sure how that plays out with freight costs versus US dollar versus Euros vs. Aussie currency....just talking distances here.


Distances are one thing, tarrifs and shipping taxes are another.

I have no idea.
Author:  ARBSeth [ Wed Nov 28, 2007 9:08 pm ]
Post subject: 
We have dealers in Germany, the Netherlands, Greece, Great Brittain and France.
www.arb.com.au
Find a dealer there... that's the international website out of Melbourne. You should be able to access that from your server. Most US inquires get sent to the US website. Different information on each site.

Good luck!

Seth
Author:  elephantrider [ Wed Nov 28, 2007 10:23 pm ]
Post subject: 
jeesus, those arb's for the chevy silverado and the ford f250 are super bad stupid

if arb made a bumper for my 98 f150, i would own two of em'...

there are quite a few imitators, but only one arb
Author:  tommudd [ Wed Nov 28, 2007 10:47 pm ]
Post subject: 
jasonk wrote:
jeesus, those arb's for the chevy silverado and the ford f250 are super bad stupid

if arb made a bumper for my 98 f150, i would own two of em'...

there are quite a few imitators, but only one arb



:wink: :wink: :lol: times 2

Tom
Author:  elephantrider [ Thu Nov 29, 2007 12:04 pm ]
Post subject: 
bad arse bumpers

Image

Image



now why would arb make a bar for a KIA and not one for my 98 f150... ???

Image
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/