Here's one I did for someone wiring some driving lights:
Just replace the lights with whatever your actual load is, and you can always bypass the switch if you don't want one in the circuit (the green wire would connect directly to terminal 86).
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| relay http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=28088 |
Page 1 of 1 |
| Author: | Burchie [ Mon Dec 31, 2007 8:17 pm ] |
| Post subject: | relay |
Can someone find me a good diagram for wiring a 4 pole relay? I thought there was on on here..... Thanks. Great board. Lots of info. |
|
| Author: | corwyyn [ Mon Dec 31, 2007 8:31 pm ] |
| Post subject: | |
Here's one I did for someone wiring some driving lights:
Just replace the lights with whatever your actual load is, and you can always bypass the switch if you don't want one in the circuit (the green wire would connect directly to terminal 86). |
|
| Author: | tommudd [ Mon Dec 31, 2007 8:34 pm ] |
| Post subject: | |
Dang Kevin thats a great drawing, need to keep that handy! Tom |
|
| Author: | corwyyn [ Mon Dec 31, 2007 8:41 pm ] |
| Post subject: | |
Just took the black and white one off the Hella website and added color coding, nothing fancy... 
|
|
| Author: | myjeepwalks [ Mon Dec 31, 2007 8:57 pm ] |
| Post subject: | |
this is a good site i always find helpful. http://www.the12volt.com/ |
|
| Author: | Burchie [ Mon Dec 31, 2007 9:08 pm ] |
| Post subject: | |
corwyyn wrote: So.... But..... OK. A 2 pole switch. No light, nothing. Just a small duck bill switch. One to 86, and the other to power with about a 3A fuse?. |
|
| Author: | Burchie [ Mon Dec 31, 2007 9:15 pm ] |
| Post subject: | |
Like this..... No? 
|
|
| Author: | myjeepwalks [ Mon Dec 31, 2007 10:24 pm ] |
| Post subject: | |
looks good to me but if that's a lighted switch you need a ground coming off it. |
|
| Author: | Burchie [ Tue Jan 01, 2008 12:14 am ] |
| Post subject: | |
myjeepwalks wrote: looks good to me but if that's a lighted switch you need a ground coming off it.
Nope... No light. I'm installing rock lights under the jeep. |
|
| Author: | corwyyn [ Tue Jan 01, 2008 5:02 am ] |
| Post subject: | |
Burchie wrote: myjeepwalks wrote: looks good to me but if that's a lighted switch you need a ground coming off it. Nope... No light. I'm installing rock lights under the jeep. Yeah thats pretty much it. You could use a lighted switch without the ground, it would still work but the light wouldn't come on. For clarity I took that middle connector out in this one: 
The 3A fuse in the sense wire is probably overkill, but it won't hurt anything to have it there. Be sure to post up some pics of the lights after you get them installed 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|