looks like 2 bolts straight in from the front and 2 up from the bottom
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| stock front bumper cover mounting http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=29025 |
Page 1 of 1 |
| Author: | EOD-KJ [ Tue Jan 29, 2008 12:20 pm ] |
| Post subject: | stock front bumper cover mounting |
hey guys, quick question besides the 2 bolts/clips on each side of the fender linings , what else exactly "holds" the front bumper cover on to the jeep what role to the crush cans play? sorry these may sound dumb, i really forgot, and am reverting back to stock cover from an ARB and dont wanna have to hot glue gun and zip tie it on! haha |
|
| Author: | ATXKJ [ Tue Jan 29, 2008 3:01 pm ] |
| Post subject: | |
looks like 2 bolts straight in from the front and 2 up from the bottom
|
|
| Author: | Blue KJ in PA [ Tue Jan 29, 2008 3:09 pm ] |
| Post subject: | |
Note you will need to replace the 12 plastic rivets with new ones. NAPA part # 770-2871 
|
|
| Author: | EOD-KJ [ Tue Jan 29, 2008 3:25 pm ] |
| Post subject: | |
thanks guys, brian how are those rails holding up for you? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|