| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Question on skid plate http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=29164 |
Page 1 of 1 |
| Author: | 501 [ Sun Feb 03, 2008 1:32 am ] |
| Post subject: | Question on skid plate |
Will an 04 T-case skid fit on an 03 without alot of modifying? What will I have to change/mod to make it fit? |
|
| Author: | 0311_DoC [ Sun Feb 03, 2008 2:35 am ] |
| Post subject: | Re: Question on skid plate |
501 wrote: Will an 04 T-case skid fit on an 03 without alot of modifying?
What will I have to change/mod to make it fit? No mods needed.. OEM or aftermarket. u may need to drill some holes unless u get the OEM nut zerts |
|
| Author: | dieselenthusiast [ Sun Feb 03, 2008 3:29 am ] |
| Post subject: | Re: Question on skid plate |
0311_DoC wrote: 501 wrote: Will an 04 T-case skid fit on an 03 without alot of modifying? What will I have to change/mod to make it fit? No mods needed.. OEM or aftermarket. u may need to drill some holes unless u get the OEM nut zerts I think I’m going to order all factory skid plates except for the factory gas tank skid. Do they come painted? Once installed, are they somewhat a permanent application or can I take them off and on pretty easy? I will have my Kilby gas tank skid custom painted to match my Jeep, unless if my wife will let me paint the rear diff cover and gas tank skid a fun color (like lime green, bright yellow, or pumpkin orange)! |
|
| Author: | 501 [ Sun Feb 03, 2008 11:05 am ] |
| Post subject: | Re: Question on skid plate |
0311_DoC wrote: No mods needed.. OEM or aftermarket. u may need to drill some holes unless u get the OEM nut zerts Thanks DoC, I can't find an 03 skid any where so I'll give an 04 a try. I just didn't want to order one, only to find out there was no way it would work. Time to get out the old credit card! Edit to say I just ordered one from Jparts! If all goes well I'll have it by the weekend, now to get my friend with a garage and the tools to let me use it to install all my goodies! |
|
| Author: | Uffe [ Sun Feb 03, 2008 1:22 pm ] |
| Post subject: | |
If fitment of ASFIR 04 armor is any pointer an 04 OEM plate would fit an 03 just fine! PS: CRD in all cases. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|