It is currently Wed Nov 04, 2026 7:37 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: Both rear seat latches are rattling and driving us nuts!
PostPosted: Thu Dec 20, 2007 8:35 pm 
Offline
LOST Junkie

Joined: Fri Feb 17, 2006 9:39 pm
Posts: 676
Location: Saylorsburg, PA
Hi all,

The latches that hold the rear seats upright or allow them to be folded down are rattling like mad on anything but the smoothest roads. It is driving us nuts! This started about a month ago. We've only got 43k miles on the KJ. Is this a "they all do that" issue with these critters? And more importantly, is there an easy fix?

Thanks all!

- Chris

_________________
Used to own:
2006 CRD Sport
Suncoast TC, Transgo shift kit, Inmotion, ORM, EHM, Magnaflow SS exhaust, Fumoto valve, EVIC added, Hensley TruControl brake controller, Pirelli Scorpion ATR LR-D in spring/summer/fall, FIA winter front and Blizzaks in winter


Top
 Profile  
 
 Post subject:
PostPosted: Thu Dec 20, 2007 9:00 pm 
Offline
This member has been Banned

Joined: Thu Mar 16, 2006 7:18 pm
Posts: 2301
Location: Harahan LA (the burbs)
yeah IIRC you can adjust them to hold the seat tighter
I may have just bent them back some but I some how made it stop by moving the steel loop


Top
 Profile  
 
 Post subject:
PostPosted: Thu Dec 20, 2007 9:32 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
Have you tried spraying them with some white lithium?

Mine have never made a noise..

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Thu Dec 20, 2007 11:42 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Sep 04, 2007 12:32 am
Posts: 362
Location: Tooele, Utah
Mine rattle tooo it sucks but i just tuRN UP THE TUNES :D

_________________
05' limited CRD Patriot Blue
RRO Rockfather
30/9.50/15 procomp mudders
rockkrawler wheels
EHM/SEGR almost, freeflow exhaust 5"hole
custom cross rails
SC ROCKSTAR (the first)
Life changes with kids,make sure it is for the best.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Dec 20, 2007 11:56 pm 
Offline
LOST Newbie

Joined: Wed Dec 05, 2007 7:18 pm
Posts: 16
Location: Miami
omg thanks 4 starting this thread i was going to ask the same question soon mine has 51k and the one right behind my driver seat does it, it drives me nuts aswell but itl do it at like a random time and then go away for like a few days and come back and i can never figure out exactly where its comming from.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Dec 21, 2007 8:03 am 
Offline
LOST Junkie

Joined: Fri Feb 17, 2006 9:39 pm
Posts: 676
Location: Saylorsburg, PA
jason thompson wrote:
yeah IIRC you can adjust them to hold the seat tighter
I may have just bent them back some but I some how made it stop by moving the steel loop


Thanks Jason! It's my wife's daily driver, but I'll have a look at what might be adjustable in there this weekend.

- Chris

_________________
Used to own:
2006 CRD Sport
Suncoast TC, Transgo shift kit, Inmotion, ORM, EHM, Magnaflow SS exhaust, Fumoto valve, EVIC added, Hensley TruControl brake controller, Pirelli Scorpion ATR LR-D in spring/summer/fall, FIA winter front and Blizzaks in winter


Top
 Profile  
 
 Post subject:
PostPosted: Fri Dec 21, 2007 11:13 am 
Offline
LOST Member

Joined: Thu Jul 12, 2007 1:19 pm
Posts: 451
Location: NYC
I have the same issue. Well I think I do, if that's not where the rattle is coming from then it's the storage cover. This weekend I’ll be able to do a little work inside a garage and I’ll try to make this stop. If it works I’ll let everyone know what I did.

_________________
'04 Liberty Limited - 245/70/16 Firestone Destination AT's, Mopar tow hooks, Draw-Tite Class IV hitch, Skid Row Engine & Transmission Skids, Mopar T-Case & Gas Tank Skids, Extended Breather Tubes, Red Top Optima, Sylvania Silver Star head lights, Hella 500FF bumper mounted driving lights


Top
 Profile  
 
 Post subject:
PostPosted: Fri Dec 21, 2007 11:31 am 
Offline
LOST Addict
User avatar

Joined: Thu Jul 07, 2005 5:32 pm
Posts: 1578
Location: Austin, Texas
You can tighten up the bolts that hold the rear seats down. They are all easily accessible although you'll need a mix of metric and SAE deep sockets and maybe an extension bar to reach a couple deep down in the back.

Some of the bolts also hold down the child-seat LATCH hook so be careful and make sure these are tightened down properly if you unbolt for any reason.

_________________
DIRTY KJ :: flickr photostream
"Primitive life is very common and intelligent life is fairly rare ... some would say it has yet to occur on Earth" --- Stephen Hawking


Top
 Profile  
 
 Post subject:
PostPosted: Wed Dec 26, 2007 11:14 pm 
Offline
LOST Newbie

Joined: Wed Sep 13, 2006 2:13 pm
Posts: 24
Location: Cary, NC
Try wrapping some electrical tape around the post, it worked on a previous truck I had.
Good Luck,


Top
 Profile  
 
 Post subject:
PostPosted: Thu Dec 27, 2007 2:47 am 
Offline
LOST Junkie
User avatar

Joined: Fri May 11, 2007 3:52 am
Posts: 748
Location: Kingsport,TN
ROWA wrote:
Try wrapping some electrical tape around the post, it worked on a previous truck I had.
Good Luck,


X2

_________________
cactus green 03 sport 3.7
Rusty's coil lift w/ Rancho RSX shocks & 3 ring clevis
custom skids and rock rails ; Surco roof rack w/ hi lift mounted
pioneer cd/aux with Zune mounted on dash; uniden cb with 4' K40 antenna
xeon lights; grill inserts; black wheels; 245/75/16s MTRs
#1281 http://www.cardomain.com/ride/2967585/1


Top
 Profile  
 
 Post subject:
PostPosted: Thu Dec 27, 2007 2:49 am 
Offline
LOST Junkie
User avatar

Joined: Fri May 11, 2007 3:52 am
Posts: 748
Location: Kingsport,TN
ROWA wrote:
Try wrapping some electrical tape around the post, it worked on a previous truck I had.
Good Luck,


X2
should be the easiest and fastest way in my opion.. i love electrical tape. plus it is black like the latch so u wouldnt notice it

_________________
cactus green 03 sport 3.7
Rusty's coil lift w/ Rancho RSX shocks & 3 ring clevis
custom skids and rock rails ; Surco roof rack w/ hi lift mounted
pioneer cd/aux with Zune mounted on dash; uniden cb with 4' K40 antenna
xeon lights; grill inserts; black wheels; 245/75/16s MTRs
#1281 http://www.cardomain.com/ride/2967585/1


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 20, 2008 9:53 am 
Offline
LOST Junkie

Joined: Fri Feb 17, 2006 9:39 pm
Posts: 676
Location: Saylorsburg, PA
I took the plastic cover off the latch assembly, but there's no obvious adjustment and there's nothing that appears to be loose. I can try the electrical tape trick on the post, but I'd rather figure out how to fix it properly if possible. This vehicle only has 50k miles on it, and the rattle started around 30k from one seat, then 5k later from the other. I'm not too impressed with having to wrap electrical tape around both latch posts to fix rattles on a 2006 vehicle with 50k miles.

- Chris

_________________
Used to own:
2006 CRD Sport
Suncoast TC, Transgo shift kit, Inmotion, ORM, EHM, Magnaflow SS exhaust, Fumoto valve, EVIC added, Hensley TruControl brake controller, Pirelli Scorpion ATR LR-D in spring/summer/fall, FIA winter front and Blizzaks in winter


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 20, 2008 11:47 am 
Offline
Lifetime Member
Lifetime Member

Joined: Wed Jun 13, 2007 5:04 pm
Posts: 1557
Location: Louisville, KY
I am having a similar noise. I thought it was from the tail gate. It is difficult to nail it down. A little tough to hop back there while you are driving.

Anyway Yours makes a noise when the seats are up in their normal position. Does it make any noise when the seats are down?

I had not tried to listen when I lower my seats. I am going to now. I agree. WAY to young of a KJ to be jerry rigging things. This needs a real fix.

_________________
'07 Ltd 3.7L, Black, OME HD's, OME shocks, Mopar Skids, AEV Bridgers w/ TPMS, Kumho KL78's, ARB Bumper, KC 130 Watters, Warn M8000 Winch, Rock Lizard Gecko Roof Basket KC 150 watters, Cobra 75WSX, 3 ft FireFly, RL Super Step Skinks


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 20, 2008 12:29 pm 
Offline
LOST Junkie

Joined: Fri Feb 17, 2006 9:39 pm
Posts: 676
Location: Saylorsburg, PA
WoodysKJ wrote:
Anyway Yours makes a noise when the seats are up in their normal position. Does it make any noise when the seats are down?

I had not tried to listen when I lower my seats. I am going to now.


It's quiet when the seats are down. My wife drove around while I was in the back seat, and when I put my fingers against the latch bar and seat, I can feel play in there that corresponds exactly with the rattling noise. Pushing the seat against the latch stops the rattle. Although I can't duplicate the noise by hand with the vehicle off, the vibration of the vehicle and the weight of the seat seems to bring about the play in the latch. Maybe it's an up-and-down play instead of forward/back play in the latch?

WoodysKJ wrote:
I agree. WAY to young of a KJ to be jerry rigging things. This needs a real fix.


Agreed.

- Chris

_________________
Used to own:
2006 CRD Sport
Suncoast TC, Transgo shift kit, Inmotion, ORM, EHM, Magnaflow SS exhaust, Fumoto valve, EVIC added, Hensley TruControl brake controller, Pirelli Scorpion ATR LR-D in spring/summer/fall, FIA winter front and Blizzaks in winter


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 20, 2008 1:07 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
just wrap tape around the brackets its not jerry rigging or anything I have seen new vehicles fixed the same way when I worked at dealerships or just bend the bracket(s) some, you guys are funny :lol: :lol: :lol: wanting to keep it all virgin or something. 40/50,000 miles its used not brand new any more, 2 wraps of tape and no more noise, whats easier ???
Oh and mine makes no noise / never has :wink: :roll:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Wed Feb 20, 2008 1:20 pm 
Offline
LOST Junkie

Joined: Sat Feb 02, 2008 9:42 pm
Posts: 991
Location: Flanders, NJ
is it the seats or doors...i too am getting the knocking noise...i thought is was the back door...tightend it and the sound is still there

_________________
02 Jeep TJ Sahara, 33's locked up front
03 SAS KJ 0n 35ish boggers(Sold :( )
Petersens 4wheel: http://www.4wheeloffroad.com/featuredve ... index.html


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 21, 2008 6:42 pm 
Offline
LOST Newbie

Joined: Fri May 25, 2007 7:01 pm
Posts: 90
Location: Motor City, Michigan
I wrapped black electrical tape around the U bar bracket where the hook of the back seat closes onto. It works, no more noise. Easy and cheap fix.

_________________
2005 Liberty Sport 4X2 V6 3.7L Stone White 100% Stock


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com