| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What size bolts? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=2986 |
Page 1 of 1 |
| Author: | SunDvl [ Tue Oct 25, 2005 11:50 am ] |
| Post subject: | What size bolts? |
Does anybody know what size bolts are used to hold the tow hitch to the frame? My Liberty didn't come with a tow hitch and I am going to be mounting the Kilby skid (mounts to same location as hitch). Thanks. |
|
| Author: | chefdab [ Tue Oct 25, 2005 7:02 pm ] |
| Post subject: | |
I remember needing a 19mm socket when I installed my hitch and skid, but I'm not sure how long the bolts are. I think somewhere around 1 and 1/2 inches. |
|
| Author: | pixeldzn [ Tue Oct 25, 2005 7:07 pm ] |
| Post subject: | |
I measured the ones that came with my Mopar skid. The manual says they are M12 bolts. I measured a length of 1.5 inches and the head of the bolt reads M(inside of a hexagon) 10.9. I also used a 19MM socket on these. Again, they're yours if you want them/can't find a suitable substitute locally. I'll mail em to you if you like. I reused the ones from my hitch when I installed so these are fresh from DC. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|