Does anybody know what size bolts are used to hold the tow hitch to the frame? My Liberty didn't come with a tow hitch and I am going to be mounting the Kilby skid (mounts to same location as hitch). Thanks.

_________________
'99 TJ Sport
'05 KJ Renegade (sold)
'95 YJ (sold)

http://www.active.com/donate/teamglasam ... 8/RWaddell

I remember needing a 19mm socket when I installed my hitch and skid, but I'm not sure how long the bolts are. I think somewhere around 1 and 1/2 inches.

_________________
David
Bel Air,Md
2003 KJ Patriot Blue Sport w/mods R.I.P.
2005 Wrangler Unlimited not so stock
L.O.S.T. #082670
http://www.cardomain.com/ride/803306
http://www.cardomain.com/ride/2399643
More mods planned than money.
-----------------

"Roads, where we're going we don't need roads."

I measured the ones that came with my Mopar skid. The manual says they are M12 bolts. I measured a length of 1.5 inches and the head of the bolt reads M(inside of a hexagon) 10.9. I also used a 19MM socket on these.

Again, they're yours if you want them/can't find a suitable substitute locally. I'll mail em to you if you like. I reused the ones from my hitch when I installed so these are fresh from DC.

_________________
2008 Unlimited Rubicon - 3.5" AEV/Nth lift - 35" MT/R with Kevlar - AEV Wheels - York OBA
2008 Patriot - Fuel Saver