| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Trailer Fun http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=30096 |
Page 1 of 1 |
| Author: | KeswickDave [ Mon Mar 03, 2008 1:24 pm ] |
| Post subject: | Trailer Fun |
I have a little utility trailer I bought last summer, it needs some TLC - new plywood sides and floor, clean up and repaint the frame etc... So I was playing with a pic, here's the original and what I'd like to do: 
Should be a fun project for the summer. I don't think I'll get it exactly like that but that's the idea I'm aiming for with the colour scheme 
Dave |
|
| Author: | Logan [ Mon Mar 03, 2008 1:36 pm ] |
| Post subject: | |
That looks good can't wait to see the final project. |
|
| Author: | jeepkj02 [ Mon Mar 03, 2008 1:58 pm ] |
| Post subject: | |
Lots of trailer topics. Looks good, but I don't think the stock wheels (16"), will fit on your trailer, you'll probably need a 14" or 15" wheel. Like how you incorporated the fender flares and trim on the trailer...very cool. 
|
|
| Author: | Jeepjeepster [ Mon Mar 03, 2008 2:04 pm ] |
| Post subject: | |
hahaha, that little tire that looks like the kj's is awesome. Think how many revs that thing is turning at 70mph! 
|
|
| Author: | KeswickDave [ Mon Mar 03, 2008 2:24 pm ] |
| Post subject: | |
LOL, yeah as I said I don't think I'll get it exact, the actual wheels on the trailer are 8", don't think the KJ's stock wheels come that small 
The side of the trailer and the wheel/fender flares were cloned off the Jeep of course, I'm not going to be able to do that in real life but will paint the existing wheels and fender flares to match the Jeep. I may hit the scrapyard and see if I can get some side moulding though, that would be cool... or I could just make it with wood and paint it. I'm looking forward to having some fun with it. Just have to wait for the snow to melt! Any more ideas to "Jeepatize" my trailer, feel free to suggest! Maybe it needs a SkySlider top! |
|
| Author: | Rush345 [ Mon Mar 03, 2008 8:26 pm ] |
| Post subject: | |
You might consider making a wooden mold and then laying some fiberglass and resin building up the Mini Femders |
|
| Author: | WV Jay [ Tue Mar 04, 2008 1:00 am ] |
| Post subject: | |
I would definately suggest bigger wheels to help with wheel bearing life at highway speeds. I upgraded from 8's to 12's for this reason. I'd like to go with 14's after I lift my KJ. My trailer needs some metal work as well. Be sure to post pics of the completed project.
|
|
| Author: | KeswickDave [ Tue Mar 04, 2008 1:27 pm ] |
| Post subject: | |
WV Jay wrote: I would definately suggest bigger wheels to help with wheel bearing life at highway speeds. I upgraded from 8's to 12's for this reason. I'd like to go with 14's after I lift my KJ. My trailer needs some metal work as well. Be sure to post pics of the completed project.
I'll have to look into that, it's a possibility and would give me an excuse to re-do the fenders as Rush345 suggested! I'm not sure if the bolt pattern is the same or if they'd fit otherwise. I'm not sure I'd want to go to the extent of replacing the axle. It's not a big deal at this point as I don't pull it very far (mostly trips to the "waste transfer station" during renovations or for moving around large stuff), but you never know. Plus it would give it a lift, and who can argue with that? |
|
| Author: | Jeep Dawg [ Tue Mar 04, 2008 1:45 pm ] |
| Post subject: | |
jeepkj02 wrote: Lots of trailer topics. Looks good, but I don't think the stock wheels (16"), will fit on your trailer, you'll probably need a 14" or 15" wheel. Like how you incorporated the fender flares and trim on the trailer...very cool.
Or install a lift kit for the trailer. LOL |
|
| Author: | medic9402 [ Fri Mar 07, 2008 2:57 am ] |
| Post subject: | |
Once you're done with the makeover, you'll need a "Trail Rated" badge for it. Looks like a great project!!! |
|
| Author: | Guest [ Fri Mar 07, 2008 2:08 pm ] |
| Post subject: | |
Jeep Dawg wrote: jeepkj02 wrote: Lots of trailer topics. Looks good, but I don't think the stock wheels (16"), will fit on your trailer, you'll probably need a 14" or 15" wheel. Like how you incorporated the fender flares and trim on the trailer...very cool. Or install a lift kit for the trailer. LOL had to do a spring-over conversion on my dad's utility trailer so my Montero, then my Trooper, and now my KJ and his Colorado can pull it without dragging the back end
|
|
| Author: | Fulltimer [ Fri Mar 07, 2008 2:42 pm ] |
| Post subject: | |
Nothing like a trailer with sliders!
Terry |
|
| Author: | Rush345 [ Fri Mar 07, 2008 10:26 pm ] |
| Post subject: | |
I think I would try to find a salvage yard truck bed, then pick up from the wrecking yard the mid-body beltline trim the rear bumper and lastly maybe the front fenders since they are one peice, paint to MATCH and ad a top cover wheather soft or hard ad the stock KJ trail lights and matching wheels and your tow rig is a true work of art.  
|
|
| Author: | KeswickDave [ Sat Mar 08, 2008 12:33 am ] |
| Post subject: | |
LOL, thanks guys... perhaps I've set the bar a little high on this one, I was really only thinking of a paint job and a little trim work...
However, the truck bed idea is interesting... going to that extent though I'm thinking it might be easier just to get the whole back half of the truck and sell the old trailer
Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|