Hi everyone, need some help...

I just recently acquired a Mopar hitch for my KJ. It did not come with any mounting hardware, i.e. bolts, nuts, washers. I know I need Grade 8, but I'm not sure on the sizes or how many of each.

Also, I'd like to get the wiring that's involved and I have no clue here either.

Can anyone help me out? Any info is greatly appreciated!

_________________
STEVE
L.O.S.T. #075255
Patriot Blue 2002 Sport, OME Lift, 245/75/16 BFG AT's on Cragar Soft 8's, Black Widow Basket, Magnaflow Exhaust, Sirius Radio, Alpine Blackbird GPS, Silverstar Headlight Bulbs, Homemade Cross Rails, Debadged, Amsoil Bumper-to-Bumper, More Mods to Come...

The hitch mounting bolts are metric M12x1.75 and at least 40mm long,you need the metric hardness of 10.9(same as grade 8 ).The metric bolts have the hardness # on the bolt head.You'll need 6 bolts and if you don't get bolts with the intergrated shoulder you'll need 6 flat washers also.

I just got the flat 4 wiring from the dealer,a very simple plug in play thing.

etrailer has the plug in type wiring as well for 35/40 bucks I think.

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Once again, guys, thanks so much for the quick responses and great information! I'm going to pick-up everything and install on Friday.

Thanks again!

_________________
STEVE
L.O.S.T. #075255
Patriot Blue 2002 Sport, OME Lift, 245/75/16 BFG AT's on Cragar Soft 8's, Black Widow Basket, Magnaflow Exhaust, Sirius Radio, Alpine Blackbird GPS, Silverstar Headlight Bulbs, Homemade Cross Rails, Debadged, Amsoil Bumper-to-Bumper, More Mods to Come...