LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Hardware
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=30191		 Page 1 of 1
Author:  PaU-MWolverine [ Wed Mar 05, 2008 8:43 pm ]
Post subject:  Hardware
Hi everyone, need some help...

I just recently acquired a Mopar hitch for my KJ. It did not come with any mounting hardware, i.e. bolts, nuts, washers. I know I need Grade 8, but I'm not sure on the sizes or how many of each. :oops:

Also, I'd like to get the wiring that's involved and I have no clue here either. :roll:

Can anyone help me out? Any info is greatly appreciated! :D
Author:  tjkj2002 [ Wed Mar 05, 2008 8:57 pm ]
Post subject: 
The hitch mounting bolts are metric M12x1.75 and at least 40mm long,you need the metric hardness of 10.9(same as grade 8 ).The metric bolts have the hardness # on the bolt head.You'll need 6 bolts and if you don't get bolts with the intergrated shoulder you'll need 6 flat washers also.

I just got the flat 4 wiring from the dealer,a very simple plug in play thing.
Author:  tommudd [ Wed Mar 05, 2008 9:23 pm ]
Post subject: 
etrailer has the plug in type wiring as well for 35/40 bucks I think.
Author:  PaU-MWolverine [ Thu Mar 06, 2008 9:07 pm ]
Post subject: 
Once again, guys, thanks so much for the quick responses and great information! I'm going to pick-up everything and install on Friday.

Thanks again!
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/